[Nils]

Day two. My girlfriend works for Lowes and got these alum extrusions on clearance. She thought I might enjoy playing with them.

The material is 3/32 5051 sheet and alum channel extrusion alloy unknown, rod is 3/32 4043, 3/32 2% Lanthinated, Everlast 250EX with cooler, 114 amps, a/c 165 hz, balance 30% EP, 500 hz pulse, 45% on-time, 50% background.

First run. Lost it a little in the edge control, but seeing improvement.

DSCN4640.JPG (127.89 KiB) Viewed 418 times

Same run, different angle.

DSCN4645.JPG (123.98 KiB) Viewed 418 times

Same run, 500 hz pulsing and 165 hz A/C helps preserve the edge on the tail end.

DSCN4643.JPG (123.13 KiB) Viewed 418 times

[ritzblitz]

Well it looks like you are getting better dude. Keep up the good practice.