Well I've been wanting to get one for a long time and a friend got a price for me I could live with so I'm now the owner of a Miller Dynasty 350.
I couldn't stretch the money for the full Tig Runner kit so I'll rob the water cooler of my OTC Tig and build a weld cart myself. I've used a friends one and I know the basics but now I can explore what it can do at my leisure.
Sorry about the blurry pic but I think my boss had just about had enough of me on the phone today.
Regards Andrew.
Tig welding tips, questions, equipment, applications, instructions, techniques, tig welding machines, troubleshooting tig welding process
awill4wd
- awill4wd
-
Active Member
-
Posts:
-
Joined:Thu Jan 31, 2013 3:57 am
-
Location:Berwick, Melbourne, Australia
We are Tig welders, gravity doesn't worry us.
Miller Dynasty 350
OTC hybrid wave 300 amp inverter Tig at work (Now retired)
Kemppi MLS 2300 inverter, 230 amps of welding brilliance for home use
Miller Dynasty 350
OTC hybrid wave 300 amp inverter Tig at work (Now retired)
Kemppi MLS 2300 inverter, 230 amps of welding brilliance for home use
noddybrian
- noddybrian
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 24, 2013 12:13 pm
Very nice - wish I had enough Tig work to justify one & the dollar to pay for it.
I now pronounce you " Man & Welder ! " - hope you'll be happy together !
I now pronounce you " Man & Welder ! " - hope you'll be happy together !
Congratulations. That machine opens up endless opportunities, especially for more industrial applications of aluminum.
Miller ABP 330, Syncrowave 250, Dynasty 300 DX.
Honorary member of the Fraternity of Faded Tee Shirts.
Honorary member of the Fraternity of Faded Tee Shirts.
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
awill4wd
- awill4wd
-
Active Member
-
Posts:
-
Joined:Thu Jan 31, 2013 3:57 am
-
Location:Berwick, Melbourne, Australia
Well, it's finally up and running.
It took a bit longer to build the cart than I'd hoped but I could only work on it over the weekends so I'm pretty happy with how it's turned out.
I also had a couple of dramas with incorrect gas and water fittings but luckily a LWS was open not too far away on a Saturday morning.
The major drama was a series of water leaks in the brand new Trefamet Tig torch where none of the fittings were done up and a hose blockage in the water cooler.
Still all is well and it's struck it's 1st arc and I'm ready to put it through its paces.
Regards Andrew from Oz.
It took a bit longer to build the cart than I'd hoped but I could only work on it over the weekends so I'm pretty happy with how it's turned out.
I also had a couple of dramas with incorrect gas and water fittings but luckily a LWS was open not too far away on a Saturday morning.
The major drama was a series of water leaks in the brand new Trefamet Tig torch where none of the fittings were done up and a hose blockage in the water cooler.
Still all is well and it's struck it's 1st arc and I'm ready to put it through its paces.
Regards Andrew from Oz.
We are Tig welders, gravity doesn't worry us.
Miller Dynasty 350
OTC hybrid wave 300 amp inverter Tig at work (Now retired)
Kemppi MLS 2300 inverter, 230 amps of welding brilliance for home use
Miller Dynasty 350
OTC hybrid wave 300 amp inverter Tig at work (Now retired)
Kemppi MLS 2300 inverter, 230 amps of welding brilliance for home use
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
That is a sweet setup.
I envy the features. I can't convince the boss of the value of buying advanced features.
Post up some pictures of the new welds!
Steve S
I envy the features. I can't convince the boss of the value of buying advanced features.
Post up some pictures of the new welds!
Steve S
awill4wd
- awill4wd
-
Active Member
-
Posts:
-
Joined:Thu Jan 31, 2013 3:57 am
-
Location:Berwick, Melbourne, Australia
Only when they are worthy of actually taking photos of.Otto Nobedder wrote:That is a sweet setup.
I envy the features. I can't convince the boss of the value of buying advanced features.
Post up some pictures of the new welds!
Steve S
We are Tig welders, gravity doesn't worry us.
Miller Dynasty 350
OTC hybrid wave 300 amp inverter Tig at work (Now retired)
Kemppi MLS 2300 inverter, 230 amps of welding brilliance for home use
Miller Dynasty 350
OTC hybrid wave 300 amp inverter Tig at work (Now retired)
Kemppi MLS 2300 inverter, 230 amps of welding brilliance for home use
Return to “Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding”
Jump to
- Introductions & How to Use the Forum
- ↳ Welcome!
- ↳ Member Introductions
- ↳ How to Use the Forum
- ↳ Moderator Applications
- Welding Discussion
- ↳ Metal Cutting
- ↳ Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- ↳ Mig and Flux Core - gas metal arc welding & flux cored arc welding
- ↳ Stick Welding/Arc Welding - Shielded Metal Arc Welding
- ↳ Welding Forum General Shop Talk
- ↳ Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds
- ↳ Welding Projects - Welding project Ideas - Welding project plans
- ↳ Product Reviews
- ↳ Fuel Gas Heating
- Welding Tips & Tricks
- ↳ Video Discussion
- ↳ Wish List
- Announcements & Feedback
- ↳ Forum News
- ↳ Suggestions, Feedback and Support
- Welding Marketplace
- ↳ Welding Jobs - Industrial Welding Jobs - Pipe Welding Jobs - Tig Welding Jobs
- ↳ Classifieds - Buy, Sell, Trade Used Welding Equipment
- Welding Resources
- ↳ Tradeshows, Seminars and Events
- ↳ The Welding Library
- ↳ Education Opportunities