Tig welding tips, questions, equipment, applications, instructions, techniques, tig welding machines, troubleshooting tig welding process
Scratch arc tig overhead
Post Reply
Miggin59
  • Posts:
  • Joined:
    Thu Jan 30, 2014 7:13 pm
  • Location:
    Southern Maryland

Hi fellows
I'm on a new sheet metal test this one is overhead scratch arc tig on 14 gauge SS.
This is to get cert. in all position 1/8" and thinner.any help would be great,,!!!
I passed my 10 gauge cert.on SS overhead.Thanks for all you're advice. Cliff
Top
Rick_H
  • Posts:
  • Joined:
    Sat Feb 08, 2014 1:50 pm
  • Location:
    PA/MD

Get in and get out...I'm assuming open root use the filler to your advantage to cool the puddle when needed.
I weld stainless, stainless and more stainless...Food Industry, sanitary process piping, vessels, whatever is needed, I like to make stuff.
ASME IX, AWS 17.1, D1.1
Instagram #RNHFAB
Top
Miggin59
  • Posts:
  • Joined:
    Thu Jan 30, 2014 7:13 pm
  • Location:
    Southern Maryland

Thanks I'm working on 18 ga. Butt weld flat. I'll check mon on the open root or not.
Top
Post Reply

Return to “Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding”