I just have to brag on my wife tonight. Ok, maybe brag and stand back in amazement. To my knowledge, she has never TIG welded before and she came out to the garage to see that I was doing the aluminum drill for some much needed practice. With this evil grin she said "move, let me try it". Well after a few practice runs on a small piece and showing her how to hold the torch and dip, she grabs the first piece pictured and proceeds to just blow my mind!! As I type this, she is still sitting there practicing!
I am beginning to wonder if she is secretly sneaking out the the garage when I am gone practicing.
I might have to re-think this thing of her being the CFO and make a weldor out of her instead.
-Jonathan
Tig welding tips, questions, equipment, applications, instructions, techniques, tig welding machines, troubleshooting tig welding process
- Superiorwelding
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 24, 2013 10:13 pm
-
Location:Eddy, TX
- Attachments
-
- image.jpg (119.08 KiB) Viewed 2025 times
-
- image.jpg (130.27 KiB) Viewed 2025 times
Instagram- @superiorwelding/@learntotig
Twitter- @_JonathanLewis
https://www.learntotig.com
https://www.superiorweldandfab.com
https://www.youtube.com/+SuperiorWeldin ... ATHANLEWIS
Twitter- @_JonathanLewis
https://www.learntotig.com
https://www.superiorweldandfab.com
https://www.youtube.com/+SuperiorWeldin ... ATHANLEWIS
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
Forgive me for not being able to source this quote (and I may be paraphrasing, it's from memory), BUT...
"For a woman to keep a man, she should love him a little and understand him a lot. For a man to keep a woman, he should love her a lot, and not try to understand her at all..."
Steve S
"For a woman to keep a man, she should love him a little and understand him a lot. For a man to keep a woman, he should love her a lot, and not try to understand her at all..."
Steve S
- Superiorwelding
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 24, 2013 10:13 pm
-
Location:Eddy, TX
.....then she casually mentions that tig welding is really not that hard. Man I got a keeper!!
Congrats Jody, we hit 8 years September 22.
So the question now is, what else about my wife don't I know?
-Jonathan
Congrats Jody, we hit 8 years September 22.
So the question now is, what else about my wife don't I know?
-Jonathan
Instagram- @superiorwelding/@learntotig
Twitter- @_JonathanLewis
https://www.learntotig.com
https://www.superiorweldandfab.com
https://www.youtube.com/+SuperiorWeldin ... ATHANLEWIS
Twitter- @_JonathanLewis
https://www.learntotig.com
https://www.superiorweldandfab.com
https://www.youtube.com/+SuperiorWeldin ... ATHANLEWIS
- Superiorwelding
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 24, 2013 10:13 pm
-
Location:Eddy, TX
My wife liked that oneOtto Nobedder wrote:Forgive me for not being able to source this quote (and I may be paraphrasing, it's from memory), BUT...
"For a woman to keep a man, she should love him a little and understand him a lot. For a man to keep a woman, he should love her a lot, and not try to understand her at all..."
Steve S
-Jonathan
Instagram- @superiorwelding/@learntotig
Twitter- @_JonathanLewis
https://www.learntotig.com
https://www.superiorweldandfab.com
https://www.youtube.com/+SuperiorWeldin ... ATHANLEWIS
Twitter- @_JonathanLewis
https://www.learntotig.com
https://www.superiorweldandfab.com
https://www.youtube.com/+SuperiorWeldin ... ATHANLEWIS
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
Been married 23 years.Superiorwelding wrote:...So the question now is, what else about my wife don't I know?
-Jonathan
Are you sure you want to know the answer to that?
Besides, who would want the mystery to be solved...
Steve S
- Superiorwelding
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 24, 2013 10:13 pm
-
Location:Eddy, TX
True, true.Otto Nobedder wrote:Been married 23 years.Superiorwelding wrote:...So the question now is, what else about my wife don't I know?
-Jonathan
Are you sure you want to know the answer to that?
Besides, who would want the mystery to be solved...
Steve S
-Jonathan
Instagram- @superiorwelding/@learntotig
Twitter- @_JonathanLewis
https://www.learntotig.com
https://www.superiorweldandfab.com
https://www.youtube.com/+SuperiorWeldin ... ATHANLEWIS
Twitter- @_JonathanLewis
https://www.learntotig.com
https://www.superiorweldandfab.com
https://www.youtube.com/+SuperiorWeldin ... ATHANLEWIS
- admin
- Site Admin
-
Posts:
-
Joined:Mon Jun 01, 2009 8:54 am
-
Location:Atlanta, GA
-
Contact:
On our 30th anniversary we rode bikes on the beach from Daytona to ponce inlet. We climbed the lighthouse and snuck champagne to the top so we could have a toast. As I looked into her eyes and sipped champagne over the bay I couldn't help but ask myself... I wonder if that handrail was welded with stick or flux core? Lol
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- Superiorwelding
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 24, 2013 10:13 pm
-
Location:Eddy, TX
man I can't stop laughing. I am guilty of thoughts like that as well.admin wrote:On our 30th anniversary we rode bikes on the beach from Daytona to ponce inlet. We climbed the lighthouse and snuck champagne to the top so we could have a toast. As I looked into her eyes and sipped champagne over the bay I couldn't help but ask myself... I wonder if that handrail was welded with stick or flux core? Lol
Sent from my iPhone using Tapatalk
-Jonathan
Instagram- @superiorwelding/@learntotig
Twitter- @_JonathanLewis
https://www.learntotig.com
https://www.superiorweldandfab.com
https://www.youtube.com/+SuperiorWeldin ... ATHANLEWIS
Twitter- @_JonathanLewis
https://www.learntotig.com
https://www.superiorweldandfab.com
https://www.youtube.com/+SuperiorWeldin ... ATHANLEWIS
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
ROTFL!!!admin wrote:On our 30th anniversary we rode bikes on the beach from Daytona to ponce inlet. We climbed the lighthouse and snuck champagne to the top so we could have a toast. As I looked into her eyes and sipped champagne over the bay I couldn't help but ask myself... I wonder if that handrail was welded with stick or flux core? Lol
I could see myself thinking that, and my wife got a good laugh from it, as well!!!
"I don't care who you are, that's funny, right there..."
Steve S
- Superiorwelding
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 24, 2013 10:13 pm
-
Location:Eddy, TX
Oh yeah, I almost forgot, when she dipped the tungsten and had to change it she handed me the torch and said "I don't change my own tungsten or gas bottles"
I love my wife!!
-Jonathan
I love my wife!!
-Jonathan
Instagram- @superiorwelding/@learntotig
Twitter- @_JonathanLewis
https://www.learntotig.com
https://www.superiorweldandfab.com
https://www.youtube.com/+SuperiorWeldin ... ATHANLEWIS
Twitter- @_JonathanLewis
https://www.learntotig.com
https://www.superiorweldandfab.com
https://www.youtube.com/+SuperiorWeldin ... ATHANLEWIS
- Superiorwelding
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 24, 2013 10:13 pm
-
Location:Eddy, TX
Not sure I want to know about thatadmin wrote:I am a hopeless romantic. But after 32 years we even have inside jokes about inconel 718
Sent from my iPhone using Tapatalk
-Jonathan
Instagram- @superiorwelding/@learntotig
Twitter- @_JonathanLewis
https://www.learntotig.com
https://www.superiorweldandfab.com
https://www.youtube.com/+SuperiorWeldin ... ATHANLEWIS
Twitter- @_JonathanLewis
https://www.learntotig.com
https://www.superiorweldandfab.com
https://www.youtube.com/+SuperiorWeldin ... ATHANLEWIS
- MinnesotaDave
-
Weldmonger
-
Posts:
-
Joined:Sun Oct 27, 2013 10:57 pm
-
Location:Big Lake/Monticello MN, U.S.A.
Bwhahahahahah!!!admin wrote:On our 30th anniversary we rode bikes on the beach from Daytona to ponce inlet. We climbed the lighthouse and snuck champagne to the top so we could have a toast. As I looked into her eyes and sipped champagne over the bay I couldn't help but ask myself... I wonder if that handrail was welded with stick or flux core? Lol
Sent from my iPhone using Tapatalk
Man that really made me laugh!
Dave J.
Beware of false knowledge; it is more dangerous than ignorance. ~George Bernard Shaw~
Syncro 350
Invertec v250-s
Thermal Arc 161 and 300
MM210
Dialarc
Tried being normal once, didn't take....I think it was a Tuesday.
Beware of false knowledge; it is more dangerous than ignorance. ~George Bernard Shaw~
Syncro 350
Invertec v250-s
Thermal Arc 161 and 300
MM210
Dialarc
Tried being normal once, didn't take....I think it was a Tuesday.
- MinnesotaDave
-
Weldmonger
-
Posts:
-
Joined:Sun Oct 27, 2013 10:57 pm
-
Location:Big Lake/Monticello MN, U.S.A.
I can see that happening!Superiorwelding wrote:Oh yeah, I almost forgot, when she dipped the tungsten and had to change it she handed me the torch and said "I don't change my own tungsten or gas bottles"
I love my wife!!
-Jonathan
This is definitely my favorite thread all day
Dave J.
Beware of false knowledge; it is more dangerous than ignorance. ~George Bernard Shaw~
Syncro 350
Invertec v250-s
Thermal Arc 161 and 300
MM210
Dialarc
Tried being normal once, didn't take....I think it was a Tuesday.
Beware of false knowledge; it is more dangerous than ignorance. ~George Bernard Shaw~
Syncro 350
Invertec v250-s
Thermal Arc 161 and 300
MM210
Dialarc
Tried being normal once, didn't take....I think it was a Tuesday.
TwentyFourSeven
- TwentyFourSeven
-
Workhorse
-
Posts:
-
Joined:Sun Aug 24, 2014 4:41 pm
-
Location:Tarpon Springs FL
admin wrote:On our 30th anniversary we rode bikes on the beach from Daytona to ponce inlet. We climbed the lighthouse and snuck champagne to the top so we could have a toast. As I looked into her eyes and sipped champagne over the bay I couldn't help but ask myself... I wonder if that handrail was welded with stick or flux core? Lol
Sent from my iPhone using Tapatalk
OMG.
Lincoln Precision Tig 225
It's a good thing all is good... otherwise, if she read this, you most likely would be sleeping on the couch or packing! the thought should have been "I wonder how bad my life would be without her!"admin wrote:On our 30th anniversary we rode bikes on the beach from Daytona to ponce inlet. We climbed the lighthouse and snuck champagne to the top so we could have a toast. As I looked into her eyes and sipped champagne over the bay I couldn't help but ask myself... I wonder if that handrail was welded with stick or flux core? Lol
Glen
Miller Dynasty 200DX - Millermatic 350P - Hypertherm Powermax 45 - Hobart Handler 150
Miller Dynasty 200DX - Millermatic 350P - Hypertherm Powermax 45 - Hobart Handler 150
- admin
- Site Admin
-
Posts:
-
Joined:Mon Jun 01, 2009 8:54 am
-
Location:Atlanta, GA
-
Contact:
No worries. She's a good sport and she will read this tomorrow and laugh. But on a serious note... Life would suck without her. She is awesome. Btw All of that lighthouse story was true except for the zinger About the handrails. Peace out
Jody
Sent from my iPhone using Tapatalk
Jody
Sent from my iPhone using Tapatalk
TwentyFourSeven
- TwentyFourSeven
-
Workhorse
-
Posts:
-
Joined:Sun Aug 24, 2014 4:41 pm
-
Location:Tarpon Springs FL
- Superiorwelding
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 24, 2013 10:13 pm
-
Location:Eddy, TX
I did discuss this possibility with another member already.....I guess we will see.TwentyFourSeven wrote:I see a "what my wife welded today" thread in the near future. Lol
-Jonathan
Instagram- @superiorwelding/@learntotig
Twitter- @_JonathanLewis
https://www.learntotig.com
https://www.superiorweldandfab.com
https://www.youtube.com/+SuperiorWeldin ... ATHANLEWIS
Twitter- @_JonathanLewis
https://www.learntotig.com
https://www.superiorweldandfab.com
https://www.youtube.com/+SuperiorWeldin ... ATHANLEWIS
Careful, Jon. Keep this up and you'll be staying home with the kids while the wife makes the bacon... Or is this all part of your plan... Did she make you do the dishes when you came inside???
It's a small world, my wife and I will be 8 years on Sept. 16th (today as it happens to be)
It's a small world, my wife and I will be 8 years on Sept. 16th (today as it happens to be)
Return to “Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding”
Jump to
- Introductions & How to Use the Forum
- ↳ Welcome!
- ↳ Member Introductions
- ↳ How to Use the Forum
- ↳ Moderator Applications
- Welding Discussion
- ↳ Metal Cutting
- ↳ Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- ↳ Mig and Flux Core - gas metal arc welding & flux cored arc welding
- ↳ Stick Welding/Arc Welding - Shielded Metal Arc Welding
- ↳ Welding Forum General Shop Talk
- ↳ Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds
- ↳ Welding Projects - Welding project Ideas - Welding project plans
- ↳ Product Reviews
- ↳ Fuel Gas Heating
- Welding Tips & Tricks
- ↳ Video Discussion
- ↳ Wish List
- Announcements & Feedback
- ↳ Forum News
- ↳ Suggestions, Feedback and Support
- Welding Marketplace
- ↳ Welding Jobs - Industrial Welding Jobs - Pipe Welding Jobs - Tig Welding Jobs
- ↳ Classifieds - Buy, Sell, Trade Used Welding Equipment
- Welding Resources
- ↳ Tradeshows, Seminars and Events
- ↳ The Welding Library
- ↳ Education Opportunities