![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
Used up to 230 amps, 2% thoriated 3/32" and 1/8", #7 gas lens and regular cup.
Case, head and a cover for a 72 Triumph 650, 5 speed.
Another engine case and the frame came in later - no pics of those, oops.
The case had some epoxy in the hole for a plug, cut it out and welded and blended.
Cover had a broken out hole, cut it off, ground a bolt down to hold open the oil passage, welded and blended.
Head was in a bad spot - cut the break down 3/4" and used it for a shelf - he will have machine shop finish blend it.
I flat filed this by hand.