Tig welding tips, questions, equipment, applications, instructions, techniques, tig welding machines, troubleshooting tig welding process
The what I welded today (/whenever) thread (pics please)
Post Reply
User avatar
  • Posts:
  • Joined:
    Fri Apr 01, 2011 10:59 pm
  • Location:
    Australia; Victoria

Hey Zank,

That's one hell of a good trick for a pony to have. Lol.

Mick
Top
ESENTI
  • Posts:
  • Joined:
    Wed Jan 04, 2012 8:36 am

Thank you , I will try for better . I look my machine angry today if there is something more i should know since it cannot speak .
I wonder if I bring a pony around this will help and my welding will go straight . Or i must go to Tibet and get in a mystical
kung fu meditation . ( joke ) .
Esenti
Top
Bugel
  • Posts:
  • Joined:
    Tue Apr 01, 2014 9:52 pm

Zank, your welds are awesome!


Sent from my iPad using Tapatalk
Top
Mikechallgren
  • Posts:
  • Joined:
    Thu Jul 17, 2014 10:25 pm
  • Location:
    Van Nuys, California

How about a spider third hand tool? I got a lot of Tig welding practice in...Still have to put some Aluminum Bronze on the ends of the legs for conductivity...
Attachments
image.jpg
image.jpg (52.8 KiB) Viewed 2529 times
image.jpg
image.jpg (52.9 KiB) Viewed 2529 times
image.jpg
image.jpg (46.6 KiB) Viewed 2529 times
Mike the wire airplane guy http://www.wiresculptor.net
Top
TamJeff
  • Posts:
  • Joined:
    Tue Dec 04, 2012 4:46 am

I got it done. I have never been crazy about radar arches with shades. Something seemingly 'hermaphrodite-ish' about it. Probably just me. I would have liked if the boat allowed more flexibility with places to mount it but there is a coaming rail that goes that far aft. Only other option would have been side mount, which would have made the cheese, more binding, so to speak. At any rate, it's a good fit and it's neatly done and it is ultimately functional and rock solid.
Image

There's a zip-out, life vest storage area over where the rigging guy is standing.
Image
Miller ABP 330, Syncrowave 250, Dynasty 300 DX.
Honorary member of the Fraternity of Faded Tee Shirts.
Top
ESENTI
  • Posts:
  • Joined:
    Wed Jan 04, 2012 8:36 am

Dear Zank , since i want a little more of my machine is it possible to give me your machine settings maybe I improve a little
my welding if i follow you .
Esenti ...
Top
motox
  • Posts:
  • Joined:
    Thu Nov 28, 2013 12:49 pm
  • Location:
    Delaware

tamjeff
another very complicated custom build
beautiful work
craig
htp invertig 221
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
Top
simondk
  • Posts:
  • Joined:
    Wed Apr 30, 2014 3:40 pm
  • Location:
    Denmark

Sry tabatalk messe up my foto :cry:
Last edited by simondk on Sat Nov 15, 2014 4:38 pm, edited 1 time in total.
Simon j.
Top
simondk
  • Posts:
  • Joined:
    Wed Apr 30, 2014 3:40 pm
  • Location:
    Denmark

Nice titanium job you have Don there Zank :) no tral gas on ? :)

Here are some pic of SS pipe i Welded during last week


156x2mm
156x2mm
156x2mm
ImageUploadedByTapatalk1416083531.859911.jpg (33.4 KiB) Viewed 2487 times
156x2mm
156x2mm
ImageUploadedByTapatalk1416083515.136048.jpg (29.84 KiB) Viewed 2487 times
156x2mm
156x2mm
ImageUploadedByTapatalk1416083493.091309.jpg (56.35 KiB) Viewed 2487 times
156x2mm
156x2mm
ImageUploadedByTapatalk1416083479.541737.jpg (40.1 KiB) Viewed 2487 times
156x2mm
156x2mm
ImageUploadedByTapatalk1416083457.564196.jpg (42.46 KiB) Viewed 2487 times
88,9x3,2 this is a 2pass
88,9x3,2 this is a 2pass
ImageUploadedByTapatalk1416083420.950582.jpg (64.07 KiB) Viewed 2487 times
88,9x3,2 this is a 2pass
88,9x3,2 this is a 2pass
ImageUploadedByTapatalk1416083437.093194.jpg (69.08 KiB) Viewed 2487 times
any one guess what tybe of SS it is ? That above ;)

1" x1,2mm pipe
1" x1,2mm pipe
ImageUploadedByTapatalk1416083399.912126.jpg (16.73 KiB) Viewed 2487 times
1" x1,2mm pipe
1" x1,2mm pipe
ImageUploadedByTapatalk1416083384.322969.jpg (57.33 KiB) Viewed 2487 times
Simon j.
Top
User avatar
  • Posts:
  • Joined:
    Sun Jan 27, 2013 6:23 am
  • Location:
    Finland

Always so easy to recognize those carbides. 316Ti?
Is that alutape you're using?
-Markus-
Top
simondk
  • Posts:
  • Joined:
    Wed Apr 30, 2014 3:40 pm
  • Location:
    Denmark

Markus: close enough it is EN 1.4541 / AISI 321

Yes why ? :)
Simon j.
Top
User avatar
  • Posts:
  • Joined:
    Sun Jan 27, 2013 6:23 am
  • Location:
    Finland

Buy some BBQ foil which is a bit thicker and stronger than normal and use it instead of tape. Why? Simply because it's cheaper, works better and you can buy it almost anywhere.

Reason why it works better is that there won't be any glue, which will smoke near weld (will cause colour to root) AND there is no need to clean that sticky glue after welding-> saves time and is more cleaner option in sanitary piping.

Worth testing at least IMO :D
-Markus-
Top
User avatar
  • Posts:
  • Joined:
    Sun Nov 16, 2014 12:20 pm

Guys I just start learn, suggestions please :3
its pipe 2mm,55A,gas 5L/m (save to learn),wire 1,5mm
today Image


2. http://imageshack.com/a/img673/6416/NV4bHq.jpg
Top
dirtmidget33
  • Posts:
  • Joined:
    Tue May 13, 2014 5:22 pm

The weirdest thing I welded ever. I TIG welded 2 broken springs on a lazy boy chair. I did not take pics honestly I didn't think it would work and just thought I would share what failed and what worked. It is my chair so no big deal if it failed just have to buy a couple of springs. I removed the 2 springs and cleaned them up. The first spring I welded back together I used ER70-S2 filler. I Welded it quick it had a very very small HAZ. The second spring same filler but put more heat into and used TIG torch to create a large HAZ. The first spring broke within an hour chair was in use at time made a neat pinge sound. Spring broke at edge of HAZ. Had a crystalline look to it at break. So removed it welded it like second spring.
That was a month ago I thought they might start to get weak and break in HAZ or flex in the HAZ and break. They have held up great even took to twins jumping in chair when their grandma lost control of them when she was watching them. (guess I know how they got broke in first place) So if you got a lazy boy with busted seat spring TIG it up :lol:
why use standard nozzles after gas lens where invented. Kinda of like starting fires by rubbing sticks together.
Top
User avatar
  • Posts:
  • Joined:
    Fri Apr 01, 2011 10:59 pm
  • Location:
    Australia; Victoria

Sometimes things like that are counterintuitive. Less heat isn't always better. I saw a 3 point linkage bar get welded up....all rules followed, preheat, post heat, special electrodes. Cracked first go. Re-welded by a halfwit with a mig. Had the whole thing glowing red hot, against all common sense. Didn't break....

Mick
Top
Cricket
  • Posts:
  • Joined:
    Tue Aug 20, 2013 10:49 pm
  • Location:
    Oregon, WI

65A, 1/16 2% lanthanated electrode, no filler, Everlast 250.
The port(tube) is 2-1/4" in diameter and 4" long. 0.034" stainless I guess it is type 316.
The HAZ is about 1/4".
Attachments
Thin-wall--tube.jpg
Thin-wall--tube.jpg (42.89 KiB) Viewed 2622 times
Top
User avatar
  • Posts:
  • Joined:
    Sun Jan 27, 2013 6:23 am
  • Location:
    Finland

Just a quick weld i made for sanitary piping today. Nothing special. Notice how well polished surface show traces of oxygen. Those little blue areas tell that oxygen content in root was around from couple of ppm to maximum 10 ppm or so.
Attachments
WP_20141127_07_42_25_Pro.jpg
WP_20141127_07_42_25_Pro.jpg (37.4 KiB) Viewed 2576 times
-Markus-
Top
User avatar
  • Posts:
  • Joined:
    Thu Jan 06, 2011 11:40 pm
  • Location:
    Near New Orleans

Been a while since I posted one of my shaky welds, so here goes...

1 1/2" sch.5 SS:
GEDC1574.JPG
GEDC1574.JPG (161.17 KiB) Viewed 2517 times
And here's a somewhat poor picture of the root (the camera wanted to focus on the end of the ell, rather than the weld)
GEDC1577.JPG
GEDC1577.JPG (156.68 KiB) Viewed 2517 times
Much of this was done in the mirror, since it was tight quarters.
GEDC1569.JPG
GEDC1569.JPG (180.86 KiB) Viewed 2517 times
I tested this to 225 PSI, and got the outer jacket done and helium leak tested. It was a good day.

Steve S
Top
User avatar
  • Posts:
  • Joined:
    Thu Jan 24, 2013 6:44 am

Markus, Steve, awesome stuff. I'm always fascinated with pipe welds. Keep 'em coming please!
Top
User avatar
  • Posts:
  • Joined:
    Sun Jan 27, 2013 6:23 am
  • Location:
    Finland

Preetty tight place there Steve. Not bad ;)
-Markus-
Top
User avatar
  • Posts:
  • Joined:
    Thu Jan 06, 2011 11:40 pm
  • Location:
    Near New Orleans

Thank you, Zank and Markus,

My shaky hands and bad eyes have taken "beautiful" out of my vocabulary for most welds, but my ability to make a passable weld with either hand in the mirror keeps the paychecks coming. I wish I got to do aluminum more often. I can still make that stuff look pretty decent...

Steve S
Top
User avatar
  • Posts:
  • Joined:
    Thu Jan 24, 2013 6:44 am

Three road frames shaping up.

ImageAluminum Road by Zanconato Custom Cycles, on Flickr

ImageAluminum Road by Zanconato Custom Cycles, on Flickr

ImageAluminum Road by Zanconato Custom Cycles, on Flickr

ImageAluminum Road by Zanconato Custom Cycles, on Flickr
Top
kiwi2wheels
  • Posts:
  • Joined:
    Sun Feb 17, 2013 10:27 am

@ zank

Beautiful !! If you ever give TIG classes, I hope I could attend .

Very nice shop too.
Top
User avatar
  • Posts:
  • Joined:
    Thu Jan 24, 2013 10:13 pm
  • Location:
    Eddy, TX

Has anyone noticed but the only thing we say when zank posts his bike frames is "nice" "beautiful" or "awesome"? Why can't you post some bad welds so we can change our mo? :lol: :lol: ;)
-Jonathan

P.S. Nice welds
Top
motox
  • Posts:
  • Joined:
    Thu Nov 28, 2013 12:49 pm
  • Location:
    Delaware

ill send zank some of mine to post the next time i weld pipe,
then there will be plenty to bust him about
craig
htp invertig 221
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
Top
Post Reply

Return to “Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding”