hey guys
same setting for aluminum bronze
as silicone bronze?
craig
- TRACKRANGER
-
Weldmonger
-
Posts:
-
Joined:Wed Aug 06, 2014 12:48 am
-
Location:Melbourne, Australia
Silicon Bronze usually is DC, but Aluminum Bronze usually is AC (no hard and fast rules)
There is a video here that might give some ideas
https://www.youtube.com/watch?v=osGjubEEfLE
Hope this helps.
Trev
There is a video here that might give some ideas
https://www.youtube.com/watch?v=osGjubEEfLE
Hope this helps.
Trev
EWM Phonenix 355 Pulse MIG set mainly for Aluminum, CIGWeld 300Amp AC/DC TIG, TRANSMIG S3C 300 Amp MIG, etc, etc
I've been doing the silicone bronze lately on AC with some cleaning action
seem nicer than DC.just picked up some alum bronze to try.
thanks for the info
craig
seem nicer than DC.just picked up some alum bronze to try.
thanks for the info
craig
htp invertig 221
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil