Tig welding tips, questions, equipment, applications, instructions, techniques, tig welding machines, troubleshooting tig welding process
I have a kid needing a patch job done on a dirt bike frame. Its an aluminum frame and my main question is do I need him to strip the bike down clear to the frame so I don't destroy any electrical parts on his bike? Or would just unplugging cdi box and what nots be fine?
kblenker#22
- kblenker#22
-
Active Member
-
Posts:
-
Joined:Tue Jul 15, 2014 9:23 pm
-
Location:Amherst, Wi
Ive welded on my dirt bike plenty of times, never disconnected anything and I've never fried anything. I'd just make sure your ground is as close to the weld as you can get. If your really worried id pull the fuel tank and unhook the coil just to be safe.
kiwi2wheels
- kiwi2wheels
-
Ace
-
Posts:
-
Joined:Sun Feb 17, 2013 10:27 am
450dualsport
- 450dualsport
-
Guide
-
Posts:
-
Joined:Wed Oct 30, 2013 10:46 am
I haven't done any welding on my frames, but I have read several times that you should disconnect the CDI box.
- TRACKRANGER
-
Weldmonger
-
Posts:
-
Joined:Wed Aug 06, 2014 12:48 am
-
Location:Melbourne, Australia
Never mind the 'she'll be right' advice. Disconnect whatever you can, and definitely put the earth as close to the weld site as possible.
EWM Phonenix 355 Pulse MIG set mainly for Aluminum, CIGWeld 300Amp AC/DC TIG, TRANSMIG S3C 300 Amp MIG, etc, etc
I've welded a lot of dirt bike frames from steel to modern aluminum
take the advice of previous posts disconnect all.
i know from expense mistakes early on.
craig
take the advice of previous posts disconnect all.
i know from expense mistakes early on.
craig
htp invertig 221
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
Return to “Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding”
Jump to
- Introductions & How to Use the Forum
- ↳ Welcome!
- ↳ Member Introductions
- ↳ How to Use the Forum
- ↳ Moderator Applications
- Welding Discussion
- ↳ Metal Cutting
- ↳ Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- ↳ Mig and Flux Core - gas metal arc welding & flux cored arc welding
- ↳ Stick Welding/Arc Welding - Shielded Metal Arc Welding
- ↳ Welding Forum General Shop Talk
- ↳ Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds
- ↳ Welding Projects - Welding project Ideas - Welding project plans
- ↳ Product Reviews
- ↳ Fuel Gas Heating
- Welding Tips & Tricks
- ↳ Video Discussion
- ↳ Wish List
- Announcements & Feedback
- ↳ Forum News
- ↳ Suggestions, Feedback and Support
- Welding Marketplace
- ↳ Welding Jobs - Industrial Welding Jobs - Pipe Welding Jobs - Tig Welding Jobs
- ↳ Classifieds - Buy, Sell, Trade Used Welding Equipment
- Welding Resources
- ↳ Tradeshows, Seminars and Events
- ↳ The Welding Library
- ↳ Education Opportunities