error_outline JavaScript Disabled
Tig welding tips, questions, equipment, applications, instructions, techniques, tig welding machines, troubleshooting tig welding process
Fri Mar 27, 2015 9:19 am
Zank,
Those are great shots. I have tried before using my phone. You are right, there is a lot more behind the scenes than we think making great welding videos.
-Jonathan
Fri Mar 27, 2015 11:07 am
Your subscribers just increased with 25%
Fri Mar 27, 2015 1:34 pm
zank
settings, material etc if you would
thanks
craig
htp invertig 221
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
Posts:
Joined:
Thu Jan 24, 2013 6:44 am
Fri Mar 27, 2015 1:56 pm
You bet. Tubing was 7005 aluminum in sizes ranging from 1.375" OD x 0.052" wall up to 2" OD x 0.157" wall. Filler was 3/32" 5183.
Machine was set at:
Max EN amps and waveshape - 150, Soft Square
Max EP amps and waveshape - 225, Advanced Square
Frequency - 250 Hz
Balance - 80% EN
Torch set up:
20 series
small gas lens with #8 cup
1/16" 2% Lanathanated tungsten
Argon at 18 CFH
Fri Mar 27, 2015 3:59 pm
that machine has some serous setting..
craig
htp invertig 221
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil