Tig welding tips, questions, equipment, applications, instructions, techniques, tig welding machines, troubleshooting tig welding process
Tig welding an overflow tank
Post Reply
Hollywood1
  • Posts:
  • Joined:
    Mon Feb 23, 2015 9:05 am
  • Location:
    Washington

Its been quite a while since Ive posted anything on the forum. I made an aluminum overflow tank for my truck using Jody and Roy's helpful tips. I have approx. 45 hrs or so tig welding and I can honestly say I wouldn't be where I am at now with all the helpful videos from jody and the forums tips as well. Thanks again here are a couple of recent pics as well as a tip I have for anyone who cannot afford a car lift like I cant.
Attachments
20150821_202810.jpg
20150821_202810.jpg (36.68 KiB) Viewed 1569 times
Top
User avatar
  • Posts:
  • Joined:
    Thu Dec 26, 2013 12:41 am
  • Location:
    Laredo, Tx

and that tip is......? :lol:
Image
Top
Hollywood1
  • Posts:
  • Joined:
    Mon Feb 23, 2015 9:05 am
  • Location:
    Washington

A couple more pics
Attachments
unnamedhhhhhhh.jpg
unnamedhhhhhhh.jpg (129.59 KiB) Viewed 1568 times
Last edited by Hollywood1 on Sat Aug 22, 2015 12:10 am, edited 1 time in total.
Top
Hollywood1
  • Posts:
  • Joined:
    Mon Feb 23, 2015 9:05 am
  • Location:
    Washington

here is the tip
Attachments
20150821_203455.jpg
20150821_203455.jpg (40.27 KiB) Viewed 1569 times
Top
Hollywood1
  • Posts:
  • Joined:
    Mon Feb 23, 2015 9:05 am
  • Location:
    Washington

here is a stainless header flange weld
Attachments
DSCN0737 (2).JPG
DSCN0737 (2).JPG (58.21 KiB) Viewed 1568 times
Top
User avatar
  • Posts:
  • Joined:
    Wed Aug 19, 2015 11:19 pm
  • Location:
    Alaska

Nice Work
Jim S.
Miller 211 Autoset
Everlast 255EXT
Everlast Water Cooler (2)
Everlast PowerPlasma 80S
Longevity 250MP
Lincoln 350MP Aluminum
Hypertherm 30Air
Everlast 350EXT
Top
User avatar
  • Posts:
  • Joined:
    Sun Sep 22, 2013 10:14 am
  • Location:
    Minneapolis Mn 55407

Or this (tip)
Attachments
ProppedUp.jpg
ProppedUp.jpg (45.87 KiB) Viewed 1538 times
Everlast 250EX
Miller 250 syncrowave
Sharp LMV Vertical Mill
Takisawa TSL-800-D Lathe
Coupla Bandsaws,Grinders,surface grinder,tool/cutter grinder
and more stuff than I deserve(Thanks Significant Other)
Top
CanMoulder
  • Posts:
  • Joined:
    Wed Apr 22, 2015 1:02 pm
  • Location:
    Ontario Canada

Hollywood1 wrote:here is the tip
Jenga Champion of the World!!
Top
Rick_H
  • Posts:
  • Joined:
    Sat Feb 08, 2014 1:50 pm
  • Location:
    PA/MD

Looks like it coming around nicely....

What's done to the truck? I see the large amount of meat in the back, what's it run?
I weld stainless, stainless and more stainless...Food Industry, sanitary process piping, vessels, whatever is needed, I like to make stuff.
ASME IX, AWS 17.1, D1.1
Instagram #RNHFAB
Top
User avatar
  • Posts:
  • Joined:
    Thu May 07, 2015 11:46 am
  • Location:
    KY.

Very nice welds for someone with only 45 hours of weld time. Did you do the chassis work on the S15?
Freddie
Top
Hollywood1
  • Posts:
  • Joined:
    Mon Feb 23, 2015 9:05 am
  • Location:
    Washington

The truck runs 9's on a 250 shot. I did not do the majority of the chassis work. Thanks for all the comments I hate to tell you this but I was getting frustrated with tig very early on and im glad im still sticking to it. Just about sold my machine.
Top
Hollywood1
  • Posts:
  • Joined:
    Mon Feb 23, 2015 9:05 am
  • Location:
    Washington

Currently making a cage for it.
Top
User avatar
  • Posts:
  • Joined:
    Wed Aug 19, 2015 11:19 pm
  • Location:
    Alaska

Hollywood1 wrote:Its been quite a while since Ive posted anything on the forum. I made an aluminum overflow tank for my truck using Jody and Roy's helpful tips. I have approx. 45 hrs or so tig welding and I can honestly say I wouldn't be where I am at now with all the helpful videos from jody and the forums tips as well. Thanks again here are a couple of recent pics as well as a tip I have for anyone who cannot afford a car lift like I cant.
One note: Other than just the fun of welding and the practice time, you may be able to get a local shop for a few $$ to bend the metal on a box and save some welding time.
Jim S.
Miller 211 Autoset
Everlast 255EXT
Everlast Water Cooler (2)
Everlast PowerPlasma 80S
Longevity 250MP
Lincoln 350MP Aluminum
Hypertherm 30Air
Everlast 350EXT
Top
User avatar
  • Posts:
  • Joined:
    Sat Aug 01, 2015 8:38 am
  • Location:
    The Land Down Under

That is some nice work, Hollywood!

Hope when I have 45 hours up I can create stuff half that professional looking.



Kym
Top
Hollywood1
  • Posts:
  • Joined:
    Mon Feb 23, 2015 9:05 am
  • Location:
    Washington

Thank you.
Top
Hollywood1
  • Posts:
  • Joined:
    Mon Feb 23, 2015 9:05 am
  • Location:
    Washington

Well here is another one today. Not ever sure how to tie in the corners correctly.
Attachments
20150824_162828.jpg
20150824_162828.jpg (40.67 KiB) Viewed 794 times
Top
GreinTime
  • Posts:
  • Joined:
    Fri Nov 01, 2013 11:20 am
  • Location:
    Pittsburgh, PA

Hollywood1 wrote:Well here is another one today. Not ever sure how to tie in the corners correctly.
Hollywood, I think the most aesthetic thing is consistency in this case. If you start at the bottom left corner for instance, and weld to the top left, go the same direction all the way around. Same thing on the long seams, Weld them in the same direction.

For the corners on the short side, if you can manage it, wrap the corner a little bit, and then you're starting on a seam, and not so much on the corner itself.
#oneleggedproblems
-=Sam=-
Top
User avatar
  • Posts:
  • Joined:
    Wed Aug 19, 2015 11:19 pm
  • Location:
    Alaska

Hollywood1 wrote:Well here is another one today. Not ever sure how to tie in the corners correctly.
Looks good.
Jim S.
Miller 211 Autoset
Everlast 255EXT
Everlast Water Cooler (2)
Everlast PowerPlasma 80S
Longevity 250MP
Lincoln 350MP Aluminum
Hypertherm 30Air
Everlast 350EXT
Top
User avatar
  • Posts:
  • Joined:
    Sat Aug 01, 2015 8:38 am
  • Location:
    The Land Down Under

Will be making up some overflows for my race bike when my skills are up to scratch but of course being a bike, they will just be small tanks. Considering just using aluminium tube and welding plate onto the ends.

Hope they look half as good as your square tanks, Hollywood.


Kym
Top
User avatar
  • Posts:
  • Joined:
    Thu May 07, 2015 11:46 am
  • Location:
    KY.

Nice work.
Freddie
Top
Hollywood1
  • Posts:
  • Joined:
    Mon Feb 23, 2015 9:05 am
  • Location:
    Washington

Thank you.
Top
Post Reply

Return to “Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding”