I used a pro con pump(eBay) carbonator motor.My heat sink was an aluminum heater core from a pick up.The resivoir was a S/S buffet pan .Panels are aluminum.Most of the stuff is just garbage or stuff I accumulated and got from friends shops.Lines and fittings are from hardware store.I use a computer muffin fan to cool the heater core.It works fine.The pricy parts were the fittings and the torch set up.Its got to be 6 years old.
[
Tig welding tips, questions, equipment, applications, instructions, techniques, tig welding machines, troubleshooting tig welding process
- MosquitoMoto
-
Weldmonger
-
Posts:
-
Joined:Sat Aug 01, 2015 8:38 am
-
Location:The Land Down Under
Hello...
I the principal shop, I had I took advantage of the icy water line in the sink to a ball valve..., I set on the back of the welder tied it into the light and ran the arrival line back to the deplete in the sink...
Utilized 200 mph tape to secure it to the sink. Simply need to make sure to turn the water on before beginning to weld...
I the principal shop, I had I took advantage of the icy water line in the sink to a ball valve..., I set on the back of the welder tied it into the light and ran the arrival line back to the deplete in the sink...
Utilized 200 mph tape to secure it to the sink. Simply need to make sure to turn the water on before beginning to weld...
Return to “Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding”
Jump to
- Introductions & How to Use the Forum
- ↳ Welcome!
- ↳ Member Introductions
- ↳ How to Use the Forum
- ↳ Moderator Applications
- Welding Discussion
- ↳ Metal Cutting
- ↳ Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- ↳ Mig and Flux Core - gas metal arc welding & flux cored arc welding
- ↳ Stick Welding/Arc Welding - Shielded Metal Arc Welding
- ↳ Welding Forum General Shop Talk
- ↳ Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds
- ↳ Welding Projects - Welding project Ideas - Welding project plans
- ↳ Product Reviews
- ↳ Fuel Gas Heating
- Welding Tips & Tricks
- ↳ Video Discussion
- ↳ Wish List
- Announcements & Feedback
- ↳ Forum News
- ↳ Suggestions, Feedback and Support
- Welding Marketplace
- ↳ Welding Jobs - Industrial Welding Jobs - Pipe Welding Jobs - Tig Welding Jobs
- ↳ Classifieds - Buy, Sell, Trade Used Welding Equipment
- Welding Resources
- ↳ Tradeshows, Seminars and Events
- ↳ The Welding Library
- ↳ Education Opportunities