ajlskater1
- ajlskater1
-
Ace
-
Posts:
-
Joined:Thu Feb 02, 2012 5:32 am
Had to weld up 200 of these on Friday. Was a good challenge. The material was .070 5052 and the hole was only .090 away from the edge of the hole and customer didn't want the hole to be distorted.
- Attachments
-
- 20160611_004753.jpg (24.53 KiB) Viewed 1550 times
-
- 20160611_004738.jpg (36.63 KiB) Viewed 1550 times
-
- 20160610_231432.jpg (30.53 KiB) Viewed 1550 times
ajlskater1
- ajlskater1
-
Ace
-
Posts:
-
Joined:Thu Feb 02, 2012 5:32 am
I am using a dynasty 350. It is a part of this larger assembly we do for this company. Not sure it's exact use.LtBadd wrote:Nice work, what machine are you using?
- Attachments
-
- 20150408_162742.jpg (32.36 KiB) Viewed 1529 times
-
- 20151222_164752.jpg (23.67 KiB) Viewed 1529 times
exnailpounder
- exnailpounder
-
Weldmonger
-
Posts:
-
Joined:Thu Dec 25, 2014 9:25 am
-
Location:near Chicago
Yeah!zank wrote:Beautiful!
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
ajlskater1
- ajlskater1
-
Ace
-
Posts:
-
Joined:Thu Feb 02, 2012 5:32 am
Thank you! Not sure it's on the same level as your work! Love seeing your bike frames!zank wrote:Beautiful!
ajlskater1
- ajlskater1
-
Ace
-
Posts:
-
Joined:Thu Feb 02, 2012 5:32 am
Was a nerve racking couple hours of welding lol. Had to focus really hardmotox wrote:and two hundred of them, holy crap.
awesome
craig
ajlskater1
- ajlskater1
-
Ace
-
Posts:
-
Joined:Thu Feb 02, 2012 5:32 am
No pulse. I used 200 en 115 ep balance of 60 and frequently of 100motox wrote:pulse?
craig
- DLewis0289
-
Ace
-
Posts:
-
Joined:Sun May 01, 2016 7:46 am
-
Location:Fort Myers Florida
Outstanding quality!
AWS D1.1 / ASME IX / CWB / API / EWI / RWMA / BSEE
Scientists have substituted mathematics for experiments, and they wander off through equation after equation, and eventually build a structure which has no relation to reality." Nikola Tesla
Scientists have substituted mathematics for experiments, and they wander off through equation after equation, and eventually build a structure which has no relation to reality." Nikola Tesla
Looks awesome! I love 5052...
I weld stainless, stainless and more stainless...Food Industry, sanitary process piping, vessels, whatever is needed, I like to make stuff.
ASME IX, AWS 17.1, D1.1
Instagram #RNHFAB
ASME IX, AWS 17.1, D1.1
Instagram #RNHFAB
"No pulse. I used 200 en 115 ep balance of 60 and frequently of 100"
did you start at 105 amps and just peddle the pool?
craig
did you start at 105 amps and just peddle the pool?
craig
htp invertig 221
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
I believe that means that he has a machine which will allow you to set differeng amperages for the positive and negative sides of the ac waveform. Jody showed one of those machines in a video recently.
Raymond
Everlast PowerTIG 255EXT
Everlast PowerTIG 255EXT
ajlskater1
- ajlskater1
-
Ace
-
Posts:
-
Joined:Thu Feb 02, 2012 5:32 am
This is correct. The dynasty 350 allows you to independently change the en and ep sides of the actual wave form and change the balance all independently. Those were the setting for the little part. The other part I set the machine at like 350 en 250 ep 70 percent balance and 250 hz, that's normally how I do mostly aluminumunless it's really thin or dirty. I don't max out the pedal, I like to feather itRamboBaby wrote:I believe that means that he has a machine which will allow you to set differeng amperages for the positive and negative sides of the ac waveform. Jody showed one of those machines in a video recently.