Tig welding tips, questions, equipment, applications, instructions, techniques, tig welding machines, troubleshooting tig welding process
The what I welded today (/whenever) thread (pics please)
Post Reply
Farmwelding
  • Posts:
  • Joined:
    Thu Mar 10, 2016 11:37 pm
  • Location:
    Wisconsin

Bisdremis K. wrote:
DSC04119.JPG
new to the forum and to welding in general(about 180lit of argon so far).. this is my practice 40mm aluminum pipe 2.5 mm wall thickes , basically a test post to see how to upload photos, hope it works :D
Ah yes... The man who wants to learn the hard way. I've never welded aluminum tubing so no pointers or judgment, but you picked the hard way to learn... But then again I beleive you learn something the hard way you do it better the easier way.
A student now but really want to weld everyday. Want to learn everything about everything. Want to become a knower of all and master of none.
Instagram: @farmwelding
Nick
Top
Rick_H
  • Posts:
  • Joined:
    Sat Feb 08, 2014 1:50 pm
  • Location:
    PA/MD

Pipes for a buddies Honda RC51 1000R sport bike
Attachments
IMG_20170502_210014085_HDR.jpg
IMG_20170502_210014085_HDR.jpg (48.23 KiB) Viewed 2670 times
IMG_20170502_210135550_HDR.jpg
IMG_20170502_210135550_HDR.jpg (44.09 KiB) Viewed 2670 times
I weld stainless, stainless and more stainless...Food Industry, sanitary process piping, vessels, whatever is needed, I like to make stuff.
ASME IX, AWS 17.1, D1.1
Instagram #RNHFAB
Top
User avatar
  • Posts:
  • Joined:
    Mon Feb 09, 2015 4:48 pm
  • Location:
    St. Johns, Michigan

Beautiful work Rick ;)
Pete



Esab SVI 300, Mig 4HD wire feeder, 30A spool gun, Miller Passport, Dynasty 300 DX, Coolmate 4, Spectrum 2050, C&K Cold Wire feeder WF-3, Black Gold Tungsten Sharperner, Prime Weld 225
Top
User avatar

Rick_H wrote:Pipes for a buddies Honda RC51 1000R sport bike
Nice work Rick, did you purge? I just bought the FUPA 12, haven't used it yet though.
Richard
Website
Top
Rick_H
  • Posts:
  • Joined:
    Sat Feb 08, 2014 1:50 pm
  • Location:
    PA/MD

LtBadd wrote:
Rick_H wrote:Pipes for a buddies Honda RC51 1000R sport bike
Nice work Rick, did you purge? I just bought the FUPA 12, haven't used it yet though.

You'll like the Fupa, took me a little to get use to pushing the screens in. Yes when welded back purged...
I weld stainless, stainless and more stainless...Food Industry, sanitary process piping, vessels, whatever is needed, I like to make stuff.
ASME IX, AWS 17.1, D1.1
Instagram #RNHFAB
Top
GreinTime
  • Posts:
  • Joined:
    Fri Nov 01, 2013 11:20 am
  • Location:
    Pittsburgh, PA

Rick_H wrote:Pipes for a buddies Honda RC51 1000R sport bike
I've never had a bike scare me worse than an RC51 :lol: :lol:

Sent from my VS995 using Tapatalk
#oneleggedproblems
-=Sam=-
Top
GreinTime
  • Posts:
  • Joined:
    Fri Nov 01, 2013 11:20 am
  • Location:
    Pittsburgh, PA

Some cold side piping for these Honda turbo kits I've been building exhaust for. ImageImageImageImage

Sent from my VS995 using Tapatalk
#oneleggedproblems
-=Sam=-
Top
exnailpounder
  • Posts:
  • Joined:
    Thu Dec 25, 2014 9:25 am
  • Location:
    near Chicago

Nice!
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
Top
User avatar

exnailpounder wrote:Nice!
+1.5 ;)
Richard
Website
Top
User avatar
  • Posts:
  • Joined:
    Thu Jan 06, 2011 11:40 pm
  • Location:
    Near New Orleans

Sam, those look like MY aluminum pipe welds.

Were you drunk? Do you need a trip to the eye doctor?

(That's how I roll...)

Just Kidding. Very nice!

Steve
Top
motox
  • Posts:
  • Joined:
    Thu Nov 28, 2013 12:49 pm
  • Location:
    Delaware

Sam
are you dabbing up those bends in the pipe?
craig
htp invertig 221
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
Top
GreinTime
  • Posts:
  • Joined:
    Fri Nov 01, 2013 11:20 am
  • Location:
    Pittsburgh, PA

motox wrote:Sam
are you dabbing up those bends in the pipe?
craig
I'm afraid I don't follow :/

Sent from my VS995 using Tapatalk
#oneleggedproblems
-=Sam=-
Top
motox
  • Posts:
  • Joined:
    Thu Nov 28, 2013 12:49 pm
  • Location:
    Delaware

sam
fabricating up, not dabbing up,spell ck sorry.....
htp invertig 221
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
Top
User avatar
  • Posts:
  • Joined:
    Mon May 01, 2017 1:48 am
  • Location:
    Thessaloniki Greece

Damn you are good , tell me that you started like this
Attachments
feel free to comment ..as it is my only source of feedback for improvement
feel free to comment ..as it is my only source of feedback for improvement
IMG_20170504_173120.jpg (29.75 KiB) Viewed 2693 times
is this an indication of over current?
is this an indication of over current?
IMG_20170504_173445.jpg (19.19 KiB) Viewed 2693 times
IMG_20170504_173140.jpg
IMG_20170504_173140.jpg (31.12 KiB) Viewed 2693 times
Is this right or over penetration?
Is this right or over penetration?
IMG_20170504_173054.jpg (27.21 KiB) Viewed 2693 times
IMG_20170504_173130.jpg
IMG_20170504_173130.jpg (30.95 KiB) Viewed 2693 times
IMG_20170504_173111.jpg
IMG_20170504_173111.jpg (27.69 KiB) Viewed 2693 times
failure is a great teacher
Top
GreinTime
  • Posts:
  • Joined:
    Fri Nov 01, 2013 11:20 am
  • Location:
    Pittsburgh, PA

Bisdremis K. wrote:Damn you are good , tell me that you started like this
Everyone starts there man!

Sent from my VS995 using Tapatalk
#oneleggedproblems
-=Sam=-
Top
BigD
  • Posts:
  • Joined:
    Thu Jan 07, 2016 1:56 pm

Finished the flange side of my intake manifold. Next need to mount the fuel rail and then wait until the engine's back in the car to figure out the plenum dimensions
manifold.jpg
manifold.jpg (61.43 KiB) Viewed 3041 times
Top
motox
  • Posts:
  • Joined:
    Thu Nov 28, 2013 12:49 pm
  • Location:
    Delaware

vey jealous!
nice job!
craig
htp invertig 221
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
Top
GreinTime
  • Posts:
  • Joined:
    Fri Nov 01, 2013 11:20 am
  • Location:
    Pittsburgh, PA

motox wrote:sam
fabricating up, not dabbing up,spell ck sorry.....
Fabricating in the sense of cutting/fitting, yes. The bends are purchased from a supplier, and then trimmed to fit/weld. That pipe starts life as a 90 w/ a 6" leg and probably 24" or so, and then a pair of 90s with 6" legs. Tangent cuts on the 90s, and then a 45 cut with offset legs to get the vertical transition spaced correctly.

Welded at 250hz (those might have been welded at 75, I don't remember :lol:) and 78% Balance. I'm not used to only having those settings to play with, I used Dynasty 350s at the other shop with independent amplitude adjustment. Not that the Dynasty 200 is a slouch by any means, but being able to tweak the arc just right makes for a rewarding experience. Or a nightmare. Depends on how far you turn the knob!!!

Sent from my VS995 using Tapatalk
#oneleggedproblems
-=Sam=-
Top
User avatar
  • Posts:
  • Joined:
    Thu Jan 06, 2011 11:40 pm
  • Location:
    Near New Orleans

BigD wrote:Finished the flange side of my intake manifold. Next need to mount the fuel rail and then wait until the engine's back in the car to figure out the plenum dimensions
Very nice, Dmitry,

I'm going to have to look you up on Instagram.

Steve
Top
BigD
  • Posts:
  • Joined:
    Thu Jan 07, 2016 1:56 pm

Thanks a lot guys!
Top
exnailpounder
  • Posts:
  • Joined:
    Thu Dec 25, 2014 9:25 am
  • Location:
    near Chicago

Wow BigD...very nice!
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
Top
BigD
  • Posts:
  • Joined:
    Thu Jan 07, 2016 1:56 pm

exnailpounder wrote:Wow BigD...very nice!
Thanks man!
Top
GreinTime
  • Posts:
  • Joined:
    Fri Nov 01, 2013 11:20 am
  • Location:
    Pittsburgh, PA

Made a new tungsten holder out of the hydraulic cylinder from one of my prosthetic "experiments" (my leg guy gave me some extras to take apart and see how they go together since he was curious as well) I should be able to hold all of the tungsten now! Image

Sent from my VS995 using Tapatalk
#oneleggedproblems
-=Sam=-
Top
Poland308
  • Posts:
  • Joined:
    Thu Sep 10, 2015 8:45 pm
  • Location:
    Iowa

IMG_0300.JPG
IMG_0300.JPG (47.62 KiB) Viewed 2878 times
IMG_0304.JPG
IMG_0304.JPG (54.53 KiB) Viewed 2878 times
Busted bolt hole and a missing chunk of metal. Going to start smoothing it down and flattening it out before it gets sent to be machined. Then they will have to redrill and tap the hole.
Attachments
IMG_0302.JPG
IMG_0302.JPG (45.59 KiB) Viewed 2878 times
I have more questions than answers

Josh
Top
Warrenh
  • Posts:
  • Joined:
    Thu Apr 27, 2017 12:31 pm

This is a scale model of turtle for a fountain project. The final product will be 7 feet long and made of bronze. ImageImage

Sent from my SCH-I545 using Tapatalk
Top
Post Reply

Return to “Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding”