Tig welding tips, questions, equipment, applications, instructions, techniques, tig welding machines, troubleshooting tig welding process
Post Reply
LIGOOMBA
  • Posts:
  • Joined:
    Sat Jan 08, 2011 11:18 pm
  • Location:
    Matthews NC

I'm looking for a little guidance on some pulse settings .I just want to try it.I weld at work on either a Dynasty 350 or 200 .I do steel and aluminum .For aluminum I do mostly .060 .My settings are 1/16 tungston .2% lanthinated ,15 CFH ,5356 filler Rod .
Lots of times I have to close up 1/16 to 1/4 diameter holes .I want to do some outside corner joints on .060 aluminum.
How should I set the machine ?
Thanks
Louie ("aka"Long Island Goomba)
Post Reply