Tig welding tips, questions, equipment, applications, instructions, techniques, tig welding machines, troubleshooting tig welding process
The what I welded today (/whenever) thread (pics please)
Post Reply
Bingo
  • Posts:
  • Joined:
    Mon Jul 03, 2017 11:03 pm
  • Location:
    FLA

Ok this one was not today but I wanted to share it. This was at a nuclear plant on the turbine deck (so no radiation that's why I had my phone)
Attachments
IMG_2566.PNG
IMG_2566.PNG (621.35 KiB) Viewed 4419 times
Top
User avatar
  • Posts:
  • Joined:
    Mon Feb 09, 2015 4:48 pm
  • Location:
    St. Johns, Michigan

Awesome work Sam... :)
Pete



Esab SVI 300, Mig 4HD wire feeder, 30A spool gun, Miller Passport, Dynasty 300 DX, Coolmate 4, Spectrum 2050, C&K Cold Wire feeder WF-3, Black Gold Tungsten Sharperner, Prime Weld 225
Top
User avatar
  • Posts:
  • Joined:
    Sun Jan 15, 2017 1:08 am

Welded this today.

This will have a big tower mounted on top like the last one I built. They wanted it to hinge on 2 small brackets, but there's no way it old hold plus the brackets were way off so I built a doubler and gussets.

This will be really cool when it's done I'll show you guys later hopefully.

Image

Image

Image

Image

Image

Sent from my SM-G920V using Tapatalk
Top
BigD
  • Posts:
  • Joined:
    Thu Jan 07, 2016 1:56 pm

Keep forgetting to post my experiences with SolarFlux. This stuff is gold if backpurging stainless isn't reasonable or practical. I use it with ISO alcohol, works GREAT!!!
IMG_6212.JPG
IMG_6212.JPG (89.88 KiB) Viewed 4171 times
Top
Poland308
  • Posts:
  • Joined:
    Thu Sep 10, 2015 8:45 pm
  • Location:
    Iowa

Did you butter up the two halves before or after you tacked them up?
I have more questions than answers

Josh
Top
Poland308
  • Posts:
  • Joined:
    Thu Sep 10, 2015 8:45 pm
  • Location:
    Iowa

Woo hoo !! Just found out the paper work went through and I get to take my weld test for my R stamp next week. :D
I have more questions than answers

Josh
Top
Coldman
  • Posts:
  • Joined:
    Mon Dec 15, 2014 2:16 am
  • Location:
    Oz

Awesome! Good luck with the test Josh!
Flat out like a lizard drinkin'
Top
BigD
  • Posts:
  • Joined:
    Thu Jan 07, 2016 1:56 pm

Poland308 wrote:Did you butter up the two halves before or after you tacked them up?
After, I tried to keep the tacks shallow. I didn't clean it all up since it's just an exhaust pipe but I wiped off an area with acetone and it's nice and shiny metal underneath.
Top
Poland308
  • Posts:
  • Joined:
    Thu Sep 10, 2015 8:45 pm
  • Location:
    Iowa

Cool! I was wondering if it would interfere with the weld process if it was worked down into a crack. I'm envisioning that you might be able to coat the two sides before you tack up. If there was no way to get at the joint after fit up.
I have more questions than answers

Josh
Top
GreinTime
  • Posts:
  • Joined:
    Fri Nov 01, 2013 11:20 am
  • Location:
    Pittsburgh, PA

Another flex from the other dayImage

Sent from my VS995 using Tapatalk
#oneleggedproblems
-=Sam=-
Top
User avatar
  • Posts:
  • Joined:
    Mon Feb 09, 2015 4:48 pm
  • Location:
    St. Johns, Michigan

Great looking weld Sam :)
Pete



Esab SVI 300, Mig 4HD wire feeder, 30A spool gun, Miller Passport, Dynasty 300 DX, Coolmate 4, Spectrum 2050, C&K Cold Wire feeder WF-3, Black Gold Tungsten Sharperner, Prime Weld 225
Top
GreinTime
  • Posts:
  • Joined:
    Fri Nov 01, 2013 11:20 am
  • Location:
    Pittsburgh, PA

pgk wrote:Great looking weld Sam :)
Thank ya kindly!!!

Sent from my VS995 using Tapatalk
#oneleggedproblems
-=Sam=-
Top
GreinTime
  • Posts:
  • Joined:
    Fri Nov 01, 2013 11:20 am
  • Location:
    Pittsburgh, PA

Some Subaru intercoolers, and some 9th Generation Honda Civic Turbo ManifoldsImageImage

Sent from my VS995 using Tapatalk
#oneleggedproblems
-=Sam=-
Top
User avatar
  • Posts:
  • Joined:
    Sat Aug 01, 2015 8:38 am
  • Location:
    The Land Down Under

That is some beautiful work!


Moz
Top
User avatar
  • Posts:
  • Joined:
    Mon Feb 09, 2015 4:48 pm
  • Location:
    St. Johns, Michigan

Sure is!!
Pete



Esab SVI 300, Mig 4HD wire feeder, 30A spool gun, Miller Passport, Dynasty 300 DX, Coolmate 4, Spectrum 2050, C&K Cold Wire feeder WF-3, Black Gold Tungsten Sharperner, Prime Weld 225
Top
User avatar

Practicing for a brazing cert, copper to copper using Harris Stay-Silv white flux and Safety-Silv 45 brazing alloy

Have to do 3/8" and 2" tubing
for nitrogen purge
for nitrogen purge
20170727_130134a.jpg (41.45 KiB) Viewed 4505 times
3/8 tubing
3/8 tubing
20170727_130619a.jpg (65.85 KiB) Viewed 4505 times
20170727_134911a.jpg
20170727_134911a.jpg (65.08 KiB) Viewed 4505 times
Richard
Website
Top
sedanman
  • Posts:
  • Joined:
    Sun Jan 03, 2016 2:54 pm
  • Location:
    Beacon and Pawling, New York

I got my welding cart done. I work for a bus company and need the security this setup gives me.
Attachments
20170724_142515.jpg
20170724_142515.jpg (34.9 KiB) Viewed 4493 times
Top
sedanman
  • Posts:
  • Joined:
    Sun Jan 03, 2016 2:54 pm
  • Location:
    Beacon and Pawling, New York

Closed
Attachments
20170724_142549.jpg
20170724_142549.jpg (32.93 KiB) Viewed 4490 times
Top
sedanman
  • Posts:
  • Joined:
    Sun Jan 03, 2016 2:54 pm
  • Location:
    Beacon and Pawling, New York

Could a moderator please rotate my pictures?
Top
Coldman
  • Posts:
  • Joined:
    Mon Dec 15, 2014 2:16 am
  • Location:
    Oz

Open your pic in "Paint", save it in correct orientation and reload. Default windows viewers often load sideways, didn't used to but hey MS has to justify an upgrade somehow!
Flat out like a lizard drinkin'
Top
sedanman
  • Posts:
  • Joined:
    Sun Jan 03, 2016 2:54 pm
  • Location:
    Beacon and Pawling, New York

I only have a smartphone.
Top
Coldman
  • Posts:
  • Joined:
    Mon Dec 15, 2014 2:16 am
  • Location:
    Oz

Sorry, can't help you there. I only have rotten fruit.


Sent using Tapatalk
Flat out like a lizard drinkin'
Top
GreinTime
  • Posts:
  • Joined:
    Fri Nov 01, 2013 11:20 am
  • Location:
    Pittsburgh, PA

A little weld detail from those Honda manifolds, and my newest toy (RogueFab M600) to play with! ImageImage

Sent from my VS995 using Tapatalk
#oneleggedproblems
-=Sam=-
Top
nelson
  • Posts:
  • Joined:
    Sun Jul 17, 2016 1:21 pm
  • Location:
    near philly

What is that? A hand powered hydraulic coal scorp?
Stone knives and bearskins.....and a NEW EVERLAST 164SI !!!
That's my newly shared work welder.
At home I got a Power Tig 185 DV. Nice, but no plasma cutting... Nice tight arc after a second.
Top
GreinTime
  • Posts:
  • Joined:
    Fri Nov 01, 2013 11:20 am
  • Location:
    Pittsburgh, PA

nelson wrote:What is that? A hand powered hydraulic coal scorp?
It's an air/Hydraulic tubing bender!

Sent from my VS995 using Tapatalk
#oneleggedproblems
-=Sam=-
Top
Post Reply

Return to “Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding”