Tig welding tips, questions, equipment, applications, instructions, techniques, tig welding machines, troubleshooting tig welding process
The what I welded today (/whenever) thread (pics please)
Post Reply
OzFlo
  • Posts:
  • Joined:
    Sat Sep 26, 2015 10:16 pm
  • Location:
    Sydney, Australia

pgk wrote:Nice job Flo :)
Thanks pgk :D
Top
dgapilot
  • Posts:
  • Joined:
    Wed Jul 26, 2017 7:00 pm

Nice welds Flo, hope I can achieve that level of consistency some day


Sent from my iPhone using Tapatalk
David

Everlast 210 EXT
Lincoln AC225
Lotos LTP5000D
Oxy-Acetylene
Top
OzFlo
  • Posts:
  • Joined:
    Sat Sep 26, 2015 10:16 pm
  • Location:
    Sydney, Australia

Thanks David.. I only posted the good ones!! :lol:
Top
User avatar
  • Posts:
  • Joined:
    Sat Aug 01, 2015 8:38 am
  • Location:
    The Land Down Under

Beautiful work, Flo.



Moz
Top
Coldman
  • Posts:
  • Joined:
    Mon Dec 15, 2014 2:16 am
  • Location:
    Oz

Was stuck in the shop waiting for deliveries. Got sick of doing paperwork so went into the shop and knocked up a third hand from scrap. The 1/4" round came from a mop squeezer already bent to perfect shape, just had to cut it to length. All three points got aluminium bronzed to eliminate sparking.
3rd hand.jpg
3rd hand.jpg (85.71 KiB) Viewed 3456 times
Deliveries came, too late to go back to site and I missed lunch so what would do you think an aussie joker would do about that?
bbq.jpg
bbq.jpg (102.94 KiB) Viewed 3456 times
Ah Queensland, beautiful one day, perfect the next. :lol: :lol: :lol:
Flat out like a lizard drinkin'
Top
User avatar
  • Posts:
  • Joined:
    Thu Jan 24, 2013 6:44 am

A few from the week. The first ones were tough. The main tubes were 0.6 mm (0.024") wall. A little nerve racking!

Image
Stephen S by Mike Zanconato, on Flickr

Image
Stephen S by Mike Zanconato, on Flickr

Image
Stephen S by Mike Zanconato, on Flickr

The rest were a little more chill. Typical 0.7 - 0.8 mm wall.

Image
Bill S by Mike Zanconato, on Flickr

Image
Rich R by Mike Zanconato, on Flickr

Image
Dan A by Mike Zanconato, on Flickr

Image
Rich R by Mike Zanconato, on Flickr
Top
Coldman
  • Posts:
  • Joined:
    Mon Dec 15, 2014 2:16 am
  • Location:
    Oz

Beautiful work as usual Zank!
0.6mm is gettin pretty thin. How does it go for strength, is there a weight limit for the rider?
Flat out like a lizard drinkin'
Top
VooDoo
  • Posts:
  • Joined:
    Mon Nov 11, 2013 10:54 am
  • Location:
    Finland

Wall thikness dosent efect on the strenght of the pipe, only material and outside diameter. You can apply the same force in pipe or axle... until there is a litle dent in the pipe.


i have made controllarms for race cars with 0.8mm wall thikness pipe, material 4130. Worked great. Cant take any dents, but is same for the stiffness than hevier wall pipe.
Top
Coldman
  • Posts:
  • Joined:
    Mon Dec 15, 2014 2:16 am
  • Location:
    Oz

Well you're wrong about that. You're just operating at a lower factor of safety. If you did the strength calculations you would know this to be true.


Sent using Tapatalk
Flat out like a lizard drinkin'
Top
VooDoo
  • Posts:
  • Joined:
    Mon Nov 11, 2013 10:54 am
  • Location:
    Finland

Thats true that the longevity of the part goes down with thin wall, but dosent effect the torsional stiffness much. Not problem @ racing (cars.. bikes..)
Top
User avatar
  • Posts:
  • Joined:
    Thu Jan 06, 2011 11:40 pm
  • Location:
    Near New Orleans

Yeah! We got our ASME "R" stamp qual yesterday. This li'l root pass was enough to send the fire marshal and board inspectors over the edge. I then went to lunch with them and the bosses and stuffed myself full. Great bunch of folk.
It'll be 3-4 weeks before we have our certificate and stamp, but code work can proceed.

Steve
ASME qual.jpg
ASME qual.jpg (26.11 KiB) Viewed 3722 times
Top
Coldman
  • Posts:
  • Joined:
    Mon Dec 15, 2014 2:16 am
  • Location:
    Oz

Great news Steve, well done. I recon the feeling might better than a standing ovation.


Sent using Tapatalk
Flat out like a lizard drinkin'
Top
Poland308
  • Posts:
  • Joined:
    Thu Sep 10, 2015 8:45 pm
  • Location:
    Iowa

Well done!
I have more questions than answers

Josh
Top
User avatar

Congratulations Steve
Richard
Website
Top
OzFlo
  • Posts:
  • Joined:
    Sat Sep 26, 2015 10:16 pm
  • Location:
    Sydney, Australia

Well done Steve! :D
Top
User avatar
  • Posts:
  • Joined:
    Sat Aug 01, 2015 8:38 am
  • Location:
    The Land Down Under

Great stuff Steve!



Moz
Top
User avatar
  • Posts:
  • Joined:
    Thu Jan 06, 2011 11:40 pm
  • Location:
    Near New Orleans

Thanks, guys! I have one procedure and test left... One vessel in the queue is aluminum, so I have to qualify separately, and qualify a separate procedure.

Steve
Top
User avatar
  • Posts:
  • Joined:
    Thu Jan 24, 2013 6:44 am

Good luck on the last one, Steve! Congrats so far!
Top
User avatar
  • Posts:
  • Joined:
    Sun Jan 15, 2017 1:08 am

Last month or so I have ore pics of each if anyone wants moreImageImageImageImageImageImageImageImageImage

Sent from my SM-G920V using Tapatalk
Top
User avatar
  • Posts:
  • Joined:
    Sun Jan 15, 2017 1:08 am

ContinuedImageImageImageImageImageImageImageImageImage

Sent from my SM-G920V using Tapatalk
Top
OzFlo
  • Posts:
  • Joined:
    Sat Sep 26, 2015 10:16 pm
  • Location:
    Sydney, Australia

Nice work 5th Street! Very nice..
Top
User avatar
  • Posts:
  • Joined:
    Sat Aug 01, 2015 8:38 am
  • Location:
    The Land Down Under

Good grief...inspiring work.


K
Top
User avatar
  • Posts:
  • Joined:
    Mon Feb 09, 2015 4:48 pm
  • Location:
    St. Johns, Michigan

Looks awesome 5th :)
Pete



Esab SVI 300, Mig 4HD wire feeder, 30A spool gun, Miller Passport, Dynasty 300 DX, Coolmate 4, Spectrum 2050, C&K Cold Wire feeder WF-3, Black Gold Tungsten Sharperner, Prime Weld 225
Top
Bingo
  • Posts:
  • Joined:
    Mon Jul 03, 2017 11:03 pm
  • Location:
    FLA

Some p91 field weld OD prep for phaser ray this is a power house main steam line. The system runs at 1950 degrees at 2400 psi. The weld shot good time for drinks!
Attachments
IMG_2404.JPG
IMG_2404.JPG (55.37 KiB) Viewed 3813 times
Top
User avatar
  • Posts:
  • Joined:
    Tue Aug 15, 2017 3:25 pm

5th Street Fab wrote:Last month or so I have ore pics of each if anyone wants moreImageImageImageImageImageImageImageImageImage

Sent from my SM-G920V using Tapatalk
this looks sick, what kind of machine you use?


Sent from my iPhone using Tapatalk
Top
Post Reply

Return to “Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding”