Tig welding tips, questions, equipment, applications, instructions, techniques, tig welding machines, troubleshooting tig welding process
The what I welded today (/whenever) thread (pics please)
Post Reply
Coldman
  • Posts:
  • Joined:
    Mon Dec 15, 2014 2:16 am
  • Location:
    Oz

I've never observed any noise suppression by styrofoam. If anything it seems to make it worse. I don't understand why.


Sent using Tapatalk
Flat out like a lizard drinkin'
Top
motox
  • Posts:
  • Joined:
    Thu Nov 28, 2013 12:49 pm
  • Location:
    Delaware

Anders
any reason for the different miter patterns?
looks cool though i must admit.
styrofoam (expanded) like you might find in a togo coffee cup
is mostly air which is a good conductor of sound.
to truly deaden you will need a dense material,
suspended between the inside and outside surfaces. even
better install a soft foam material inside surface to remove the echo
factor.
hope this makes some sense...lol
craig
htp invertig 221
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
Top
exnailpounder
  • Posts:
  • Joined:
    Thu Dec 25, 2014 9:25 am
  • Location:
    near Chicago

AndersK wrote:Thx Richard

Here it is done with styro-foam cladding
Will be used for noise supression of a pump.
IMG_20170522_3347.jpg
Nice job...cool miters
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
Top
User avatar
  • Posts:
  • Joined:
    Sat Mar 30, 2013 11:49 am
  • Location:
    Sweden

Yeah, I know there are better materials to use but this will do for now.

No reason for the miter pattern other than for the look. Just wanted to try it out on something even if it was overkill in this case :mrgreen:

Adds a lot of strength though compared to miter two and just drop down the third leg. Maybe stress relief is a better wording.
Top
User avatar
  • Posts:
  • Joined:
    Thu Jan 06, 2011 11:40 pm
  • Location:
    Near New Orleans

MosquitoMoto wrote:Some lovely work showing up here lately guys.

You people have skills to be truly proud of.

Moz
...Must be time for me to post some of my epic fails, again...

Steve
Top
Farmwelding
  • Posts:
  • Joined:
    Thu Mar 10, 2016 11:37 pm
  • Location:
    Wisconsin

Otto Nobedder wrote:
MosquitoMoto wrote:Some lovely work showing up here lately guys.

You people have skills to be truly proud of.

Moz
...Must be time for me to post some of my epic fails, again...

Steve
Come on Steve-your work is phenomenal and you know it. Your skill is amplified by the fact you do it all in weird places and posistions. So stop talking yourself down dang it!
A student now but really want to weld everyday. Want to learn everything about everything. Want to become a knower of all and master of none.
Instagram: @farmwelding
Nick
Top
User avatar
  • Posts:
  • Joined:
    Thu Jan 06, 2011 11:40 pm
  • Location:
    Near New Orleans

Farmwelding wrote:
Otto Nobedder wrote:
MosquitoMoto wrote:Some lovely work showing up here lately guys.

You people have skills to be truly proud of.

Moz
...Must be time for me to post some of my epic fails, again...

Steve
Come on Steve-your work is phenomenal and you know it. Your skill is amplified by the fact you do it all in weird places and posistions. So stop talking yourself down dang it!
None of that prevents me from having epic fails. We all do, at least once in a while. Some days, you're the hammer. Some days, you're the nail.

Steve
Top
ex framie
  • Posts:
  • Joined:
    Sun Aug 09, 2015 1:09 am
  • Location:
    Brisbane QLD Land of oz

Did I just tune into a "reality" channel?
Post away Steve.
Pete

God gave man 2 heads and only enough blood to run 1 at a time. Who said God didn't have a sense of humour.....
Top
Farmwelding
  • Posts:
  • Joined:
    Thu Mar 10, 2016 11:37 pm
  • Location:
    Wisconsin

Well of course that's true Steve. That's just a part of life. Gotta have a screw up every once in awhile. All I'm saying is you don't give yourself enough credit(seems to be a theme with people in the trades...)
A student now but really want to weld everyday. Want to learn everything about everything. Want to become a knower of all and master of none.
Instagram: @farmwelding
Nick
Top
Just Nick
  • Posts:
  • Joined:
    Fri Apr 14, 2017 12:57 pm

Farmwelding wrote:Well of course that's true Steve. That's just a part of life. Gotta have a screw up every once in awhile. All I'm saying is you don't give yourself enough credit(seems to be a theme with people in the trades...)

Not all People in the trades only the ones that care what they do and strive to be better. I see laziness all the time in my trade guys don't even what to learn why things do what they do they just want to swap parts out instead of fix issues. Its sad to see finding people that apply themselves is getting harder and harder
Top
Farmwelding
  • Posts:
  • Joined:
    Thu Mar 10, 2016 11:37 pm
  • Location:
    Wisconsin

Just Nick wrote:
Farmwelding wrote:Well of course that's true Steve. That's just a part of life. Gotta have a screw up every once in awhile. All I'm saying is you don't give yourself enough credit(seems to be a theme with people in the trades...)

Not all People in the trades only the ones that care what they do and strive to be better. I see laziness all the time in my trade guys don't even what to learn why things do what they do they just want to swap parts out instead of fix issues. Its sad to see finding people that apply themselves is getting harder and harder
I was going more on the side of that people in the trades who are really good, don't give themselves enough credit for their work. Very humble people. I am sure that it is the case in most work environments.
A student now but really want to weld everyday. Want to learn everything about everything. Want to become a knower of all and master of none.
Instagram: @farmwelding
Nick
Top
User avatar
  • Posts:
  • Joined:
    Wed Oct 15, 2014 9:29 am

LtBadd wrote:A steel lifting fixture, a little bit of MIG and mostly TIG
20170512_123422a.jpg
CNC plasma cut? This forum is going to cost me money, er I mean more money.
Top
User avatar

Coolidge wrote:
LtBadd wrote:A steel lifting fixture, a little bit of MIG and mostly TIG
20170512_123422a.jpg
CNC plasma cut? This forum is going to cost me money, er I mean more money.
L.A.S.E.R. material is 1/4" HRPO
Richard
Website
Top
Poland308
  • Posts:
  • Joined:
    Thu Sep 10, 2015 8:45 pm
  • Location:
    Iowa

Just Nick wrote:
Not all People in the trades only the ones that care what they do and strive to be better. I see laziness all the time in my trade guys don't even what to learn why things do what they do they just want to swap parts out instead of fix issues. Its sad to see finding people that apply themselves is getting harder and harder

I run a service truck for a union mechanical contractor. I agree 100%. But armed with that simple knowledge, a person willing to act on it will be putting themselves in a position to excel well beyond average. By doing so they will make sure they are not only employed long term but they will be "in demand". Those same people will also be paid $$$$$$ a premium for the work they do.
I have more questions than answers

Josh
Top
User avatar
  • Posts:
  • Joined:
    Wed Oct 15, 2014 9:29 am

I made a pedestal for a Forward/Reverse barrel switch!

Image

Image
Top
Farmwelding
  • Posts:
  • Joined:
    Thu Mar 10, 2016 11:37 pm
  • Location:
    Wisconsin

Coolidge wrote:
LtBadd wrote:A steel lifting fixture, a little bit of MIG and mostly TIG
20170512_123422a.jpg
CNC plasma cut? This forum is going to cost me money, er I mean more money.
Trust me you can live without a CNC plasma cutter for now. Don't need to get the wife to mad. If you wanted to get into custom signage or you need to cut a lot of similar parts and could make a decent check doing it-maybe then consider it.
A student now but really want to weld everyday. Want to learn everything about everything. Want to become a knower of all and master of none.
Instagram: @farmwelding
Nick
Top
Warrenh
  • Posts:
  • Joined:
    Thu Apr 27, 2017 12:31 pm

ImageImageImage

Fishing platform and leaning stand for a bay boat. This is mostly anodized aluminum but the platform is 1/4 inch aluminum.

Sent from my SCH-I545 using Tapatalk
Top
exnailpounder
  • Posts:
  • Joined:
    Thu Dec 25, 2014 9:25 am
  • Location:
    near Chicago

Nice warren.
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
Top
motox
  • Posts:
  • Joined:
    Thu Nov 28, 2013 12:49 pm
  • Location:
    Delaware

great fab work and welds.
how did you do the bullet ends?

craig
htp invertig 221
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
Top
Warrenh
  • Posts:
  • Joined:
    Thu Apr 27, 2017 12:31 pm

motox wrote:great fab work and welds.
how did you do the bullet ends?

craig
They are milled. I plug weld them under the brace.

Sent from my SCH-I545 using Tapatalk
Top
Poland308
  • Posts:
  • Joined:
    Thu Sep 10, 2015 8:45 pm
  • Location:
    Iowa

IMG_2193.JPG
IMG_2193.JPG (55.86 KiB) Viewed 2507 times
Worked on a bypass line for a big air compressor tank. 3 inch sch 40 carbon.
Attachments
IMG_2195.JPG
IMG_2195.JPG (27.94 KiB) Viewed 2507 times
IMG_2194.JPG
IMG_2194.JPG (36.56 KiB) Viewed 2507 times
I have more questions than answers

Josh
Top
Poland308
  • Posts:
  • Joined:
    Thu Sep 10, 2015 8:45 pm
  • Location:
    Iowa

Here's where I cut it in and some finished pics
IMG_2200.JPG
IMG_2200.JPG (34.65 KiB) Viewed 2503 times
Attachments
IMG_2202.JPG
IMG_2202.JPG (34.69 KiB) Viewed 2503 times
IMG_2201.JPG
IMG_2201.JPG (38.11 KiB) Viewed 2503 times
IMG_2200.JPG
IMG_2200.JPG (34.65 KiB) Viewed 2503 times
I have more questions than answers

Josh
Top
Farmwelding
  • Posts:
  • Joined:
    Thu Mar 10, 2016 11:37 pm
  • Location:
    Wisconsin

That's a big air compressor!
A student now but really want to weld everyday. Want to learn everything about everything. Want to become a knower of all and master of none.
Instagram: @farmwelding
Nick
Top
Coldman
  • Posts:
  • Joined:
    Mon Dec 15, 2014 2:16 am
  • Location:
    Oz

Nice work Josh.
That's kinda my ideal favourite job. 3", fab up on stands, bolt it up and weld it in, beer. Life's good.


Sent using Tapatalk
Flat out like a lizard drinkin'
Top
Poland308
  • Posts:
  • Joined:
    Thu Sep 10, 2015 8:45 pm
  • Location:
    Iowa

Coldman wrote:Nice work Josh.
That's kinda my ideal favourite job. 3", fab up on stands, bolt it up and weld it in, beer. Life's good.


Sent using Tapatalk
Made for a good Saturday. Work plus drive time. 8 hrs of time and a half and 1 of double.
I have more questions than answers

Josh
Top
Post Reply

Return to “Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding”