ryanjames170
- ryanjames170
-
Guide
-
Posts:
-
Joined:Sun Sep 25, 2016 12:46 pm
-
Location:Wisconsin
so if i may ask, and i know someone has asked it before, but what happens if you run this mix with TIG? crappy welds or is it much worse?
Welder/Fitter
RM Fab & Products
Lincoln Invertec V300 pro
Miller 54D Wire Feeder
Miller 2E DC Welder Generator
Everlast Power IMIG 200
Everlast Power ARC 200ST
Klutch Plasma 275i Plasma Cutter
Hobard/Smith Oxy Torch using propane.
RM Fab & Products
Lincoln Invertec V300 pro
Miller 54D Wire Feeder
Miller 2E DC Welder Generator
Everlast Power IMIG 200
Everlast Power ARC 200ST
Klutch Plasma 275i Plasma Cutter
Hobard/Smith Oxy Torch using propane.
Farmwelding
- Farmwelding
-
Weldmonger
-
Posts:
-
Joined:Thu Mar 10, 2016 11:37 pm
-
Location:Wisconsin
Find a video in YouTube. Eats away at the tungsten and makes sparks unlike normal tig welding.
A student now but really want to weld everyday. Want to learn everything about everything. Want to become a knower of all and master of none.
Instagram: @farmwelding
Nick
Instagram: @farmwelding
Nick
dirtmidget33
- dirtmidget33
-
Heavy Hitter
-
Posts:
-
Joined:Tue May 13, 2014 5:22 pm
Can't tig with it get 100% argon will do everything you need to do with tig. Most common variant for gas mixture with modern tig is adding helium to it. There is a few odd special mixes for tig that are used for certain welding procedures when required like adding hydrogen to it, but 100% argon is what you need.
why use standard nozzles after gas lens where invented. Kinda of like starting fires by rubbing sticks together.