i tried tig a few weeks back but had no end of issues due to poor work aera and thin electrode.
got some 2.6mm (3/32) electrode and a stronghand nomad welding table.
so todays effort was a whole lot better. still dipping the tungsten, hitting it with the rod etc. but a lot easier starts and at least i'm starting to get some welds down. did a few lap, butt and corner joints, went great then absolute dogs breakfast . did some corners joins on some tubing, which i've blown holes through with the mig before. rather pleased i didn't blow holes through and it went ok.
its much more precise, i can move the puddle around, see what i'm doing.
i really like that
not using anything fancy, just a manual torch, gestimate the amperage. bit of an issue stopping, hanvn't got the knack of snapping out.
learnt the importance of securing the work piece. nothing like bumping the work and drowning the tungsten. resharpen again arghhh!
Tig welding tips, questions, equipment, applications, instructions, techniques, tig welding machines, troubleshooting tig welding process
- tungstendipper
-
Weldmonger
-
Posts:
-
Joined:Sun Nov 19, 2017 10:09 am
This sound like me!! Now you know how I got my name. What helped me, get a 4" X 6" X 3/16" piece of aluminum and do row after row of welds. I did 2 rows then let it cool. Do front and back then the edges. This helps with tungsten dipping and pedal control. You'll have good days and bad days.tweake wrote:i tried tig a few weeks back but had no end of issues due to poor work aera and thin electrode.
got some 2.6mm (3/32) electrode and a stronghand nomad welding table.
so todays effort was a whole lot better. still dipping the tungsten, hitting it with the rod etc. but a lot easier starts and at least i'm starting to get some welds down. did a few lap, butt and corner joints, went great then absolute dogs breakfast . did some corners joins on some tubing, which i've blown holes through with the mig before. rather pleased i didn't blow holes through and it went ok.
its much more precise, i can move the puddle around, see what i'm doing.
i really like that
not using anything fancy, just a manual torch, gestimate the amperage. bit of an issue stopping, hanvn't got the knack of snapping out.
learnt the importance of securing the work piece. nothing like bumping the work and drowning the tungsten. resharpen again arghhh!
Lincoln MP 210, Lincoln Square Wave 200,
Everlast 210 EXT
Thermal Dynamics 25 Plasma cutter
" Anything that carries your livelihood wants to be welded so that Thor can’t break it."
CJ737
Everlast 210 EXT
Thermal Dynamics 25 Plasma cutter
" Anything that carries your livelihood wants to be welded so that Thor can’t break it."
CJ737
Return to “Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding”
Jump to
- Introductions & How to Use the Forum
- ↳ Welcome!
- ↳ Member Introductions
- ↳ How to Use the Forum
- ↳ Moderator Applications
- Welding Discussion
- ↳ Metal Cutting
- ↳ Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- ↳ Mig and Flux Core - gas metal arc welding & flux cored arc welding
- ↳ Stick Welding/Arc Welding - Shielded Metal Arc Welding
- ↳ Welding Forum General Shop Talk
- ↳ Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds
- ↳ Welding Projects - Welding project Ideas - Welding project plans
- ↳ Product Reviews
- ↳ Fuel Gas Heating
- Welding Tips & Tricks
- ↳ Video Discussion
- ↳ Wish List
- Announcements & Feedback
- ↳ Forum News
- ↳ Suggestions, Feedback and Support
- Welding Marketplace
- ↳ Welding Jobs - Industrial Welding Jobs - Pipe Welding Jobs - Tig Welding Jobs
- ↳ Classifieds - Buy, Sell, Trade Used Welding Equipment
- Welding Resources
- ↳ Tradeshows, Seminars and Events
- ↳ The Welding Library
- ↳ Education Opportunities