Page 1 of 1
Tips on restarts and termination?
Posted: Fri May 25, 2018 2:11 pm
by TravisBeard
I keep ruining welds at the restart and at the end. All I have is a torch switch. Any advice?
Sent from my SM-G955U using Tapatalk
Re: Tips on restarts and termination?
Posted: Fri May 25, 2018 5:57 pm
by cj737
Add an extra heavy dab at the termination when you snap off. Then, when you restart, light up on the dab, move forward a bit, then add filler. The extra dab works as filler to prevent the cratering, plus a “starter” dab when you restart.
Re: Tips on restarts and termination?
Posted: Tue May 29, 2018 10:24 pm
by TravisBeard
Thanks!
Sent from my SM-G955U using Tapatalk