2-1/2" weld cap
Posted: Thu Oct 24, 2019 11:30 pm
Had to cap off some 2-1/2" lines the other day.
It was a beautiful fine day, dry, no wind.
Had to use a 6FT step ladder for while.
The pump out was perfect, no leaking ammonia or oil.
Drank beer afterwards.
Burp
It was a beautiful fine day, dry, no wind.
Had to use a 6FT step ladder for while.
The pump out was perfect, no leaking ammonia or oil.
Drank beer afterwards.
Burp
- DN65 Cap.jpg (103.1 KiB) Viewed 573 times