Page 1 of 1
Tig following the torch?
Posted: Wed Oct 26, 2011 8:23 am
by metalmechanix
Can you tig following the torch? Making weld pool and adding filler rod as the torch is moved away from rod in stead of normal way.
Re: Tig following the torch?
Posted: Thu Oct 27, 2011 3:25 am
by weldin mike 27
Hey there,
I have done this, but only in a really tight spot. The main problem is that the filler metal is going in on the cold side of the pool and therefore you may get lack of fusion.
Mick
Re: Tig following the torch?
Posted: Thu Oct 27, 2011 7:48 am
by metalmechanix
Thanks, I figured there was a good reason not to but can be used in a pinch to get the job done. I am left handed so all ready going left to right. Have practiced a little switching hands but needs more practice.
Re: Tig following the torch?
Posted: Sat Oct 29, 2011 12:02 am
by weldin mike 27
Hi there,
I am left handed as well. But someone has to weld the other sides now don't they. LOL
Mick
Re: Tig following the torch?
Posted: Sat Oct 29, 2011 7:31 am
by metalmechanix
true very true someone does have to weld the other side. Ha!