Page 1 of 1
Inco 718
Posted: Thu Sep 10, 2020 11:49 pm
by Spweld
I've been welding Aerospace since the '80s and I finally bought me the furick cup and tried it for the first time on inconel 718 and when I set the flowmeter to the recommended 20-30 it just didn't seem like it was enough so I cranked it to 50 and what a huge difference it made my inco look nice and clear without all the crud that you normally see from inco 718. Give it a try if you have it.
Re: Inco 718
Posted: Fri Sep 11, 2020 6:37 am
by LtBadd
Spweld wrote:I've been welding Aerospace since the '80s and I finally bought me the furick cup and tried it for the first time on inconel 718 and when I set the flowmeter to the recommended 20-30 it just didn't seem like it was enough so I cranked it to 50 and what a huge difference it made my inco look nice and clear without all the crud that you normally see from inco 718. Give it a try if you have it.
Which Furick cup did you buy, and how about a pic of the Inco weld
Re: Inco 718
Posted: Fri Sep 11, 2020 7:24 am
by Oscar
Spweld wrote:I've been welding Aerospace since the '80s and I finally bought me the furick cup and tried it for the first time on inconel 718 and when I set the flowmeter to the recommended 20-30 it just didn't seem like it was enough so I cranked it to 50 and what a huge difference it made my inco look nice and clear without all the crud that you normally see from inco 718. Give it a try if you have it.
Do you have any Inconel rod to sell? I was gonna order some but I put that on hold. Looking for 718 and x750.