Page 1 of 1
tig inverter
Posted: Tue Nov 22, 2011 9:31 pm
by blaze
hi, i am new here, i was wanting to know if anybody had any info on the eastwood tig 200???
Re: tig inverter
Posted: Wed Nov 23, 2011 1:28 am
by weldin mike 27
Hi there,
There is heaps of stuff on these welders on You tube. I just seached eastwood tig and up she comes.
Mick
Re: tig inverter
Posted: Wed Nov 23, 2011 8:06 am
by blaze
Thanks..
I think I jumped to quick...
I got one last night from eastwood the
price was just to good...
Re: tig inverter
Posted: Wed Nov 23, 2011 8:32 am
by blaze
Thanks..
I think I jumped to quick...
I got one last night from eastwood the
price was just to good...
Re: tig inverter
Posted: Thu Nov 24, 2011 5:21 am
by weldin mike 27
Hey there,
Don't worry to much about your choice. They seem like a reasonable machine for the cost. You will always have buyers remorse after the fact, no matter what you buy. When you get the welder, try it out, make use of all the info you can find, Ie: youtube, customer service numbers and if you don't like it return it or sell it. No worries.
Good luck
Mick
Re: tig inverter
Posted: Thu Nov 24, 2011 8:37 am
by blaze
thanks mick,
Re: tig inverter
Posted: Fri Nov 25, 2011 11:01 pm
by weldin mike 27
Hey,
No worries, Mate. Let us know how ya go.
mick
Re: tig inverter
Posted: Sun Nov 27, 2011 6:16 pm
by blaze
Hey Mick,
Just put the eastwood 200 to the test.
This machine can do everything my miller could do....
I put about 25 hours on it so far and it performed like a champ,
On ac aluminum 22ga to 3/8 that the limit with just argon
And the same on dc mild steel...
Re: tig inverter
Posted: Tue Nov 29, 2011 5:52 am
by weldin mike 27
Hey there,
Sounds like a good thing. Just look at it the wrong way, or it might blow your head off with a .44 Magnum.
Dirty Harry style.
Mick