[Hyp05fxdl]

Trying to figure out what's causing the below. Fresh bottle and the welder checked out fine at the local shop. Tungsten was clean prior to starting the arc.

20211209_190024.jpg (11.53 MiB) Viewed 611 times

[cj737]

You’ve got gas issues. At least.

Appears the insulators are incorrectly assembled. What gas CFH are you running, what filler wire? Amperage?

[tweake]

yeah you seam to have two insulators fitted. the original one on the torch pops off and you fit the one that comes in the kit.