Page 1 of 1
HOTWIRE TIG
Posted: Wed Oct 24, 2012 2:37 am
by CYLX
We are updating our shop and recently looked at a product from a company called TIPTIG USA. The use the Hotwire TIG process. I can't find much information or if there are other companies with similiar processes. The ability to automate TIG is great. The cost is well worth it if it works. Any information on TIPTIG or especially another company that does it would be appreciated. Thanks
PhelandLucas@cylx.net
Re: HOTWIRE TIG
Posted: Wed Oct 24, 2012 4:27 am
by weldin mike 27
Hey,
Theres lots of videos on tiptig on youtube. Also I believe the web site
www.weldreality.com
has something to do with it.
Mick
Re: HOTWIRE TIG
Posted: Tue Dec 11, 2012 8:22 pm
by ajlskater1
The company I work does do some automated tig on some of the large pipe and also thin fusion stuff. It works OK but to be honest I manually weld the large pipes cause more times than not we have to fix the auto welded stuff. It work better for the fusion stuff but still one of spends a hour a day fixing the skips from the auto welder. In my opinion nothing beats a skilled welder