Page 1 of 1
large gas lens for a 20 water cooled
Posted: Mon Oct 07, 2013 10:11 am
by ajlskater1
So its been a long time since I have posted been busy working down in Argentina most of the summer piping a cheese plant. But anyway I was wondering what large tig cup you guys use for a water cooled 20 and.the website where to find it. I just want to give a shout out and thanks to.Jody for coming up with the tig finger. I bought 1 five years ago and just finally wore it out and bought another, wish gloves lasted that long.
Re: large gas lens for a 20 water cooled
Posted: Tue Oct 08, 2013 7:34 am
by Fat Bob
Re: large gas lens for a 20 water cooled
Posted: Tue Oct 08, 2013 8:08 am
by zank
If you are looking for a larger cup, such as a 12, you will need a 45V116S (1/16") or 45V64S (3/32") with the long collets 13N22L and13N23L, respectively. You will also need a larger heat shield. I use CK consumables, so the corrresponding CK part numbers are
2GL116LD 1/16" gas lens
2GL332LD 3/32" gas lens
2C116LD 1/16" collet
2C332LD 3/32" collet
2GHSLD heat shield
3AG12LD #12 cup
USA Weld carries them.