Silicon bronze welded cast part
Posted: Sun Feb 16, 2014 11:41 pm
Ok as promised here is my attempt to silicon bronze a small cast part off of one of my vises. Before people jump in and say I should have done this or that know I chose this process because I have never repaired a cast part with silicon bronze and I promised AKweldshop (John) that if he posted pictures of his cast vise repair, I would post pictures of this. Machine settings; 100 amps (used 75?) 3/32" 1.5% Lanthanated, stubby CK gas lens, 15 cfh and 3/32 silicon bronze. I was impressed with how well it worked and think it will hold. Enjoy.