Welding Tips and Tricks

Hi,

I would like to buy a Flexloc torch for my Miller MPi 220P.
From what I understand there is a 3/8 Safeloc connector on the Miller MPi 220P and a 2 pin connector.
http://www.millerwelds.com/pdf/spec_sheets/DCM9-5UK.pdf

What else do I need to connect the CK FL1325SF to my Miller MPi 220P?
http://www.ckworldwide.com/fl130.htm

What size off thread is on the Flexloc torch cable?

I don't know what I need to connect this all together. And they have to ship it from the US so I want to make sure I order the correct stuff.

Can anyone tell me?
Thanks

Welcome aboard, Fred,

We have many members who may be able to give you an answer from experience. We are international in nature, so the "right " answer may take time.

If you don't have a "firsthand experience" answer within a few days' time, we'll try to help dig up the information for you.

Steve S

I ordered everything, It should be alright.

I just needed a CK SL2-25 SafeLoc Male Dinse 25 (3/8"). (CK9,17,MR70) because my machine has a 3/8 connector.

When I saw the image it was easy to understand.