Tig welding tips, questions, equipment, applications, instructions, techniques, tig welding machines, troubleshooting tig welding process
Steady-Grip
Post Reply
User avatar
  • Posts:
  • Joined:
    Tue Aug 19, 2014 2:34 am
  • Location:
    Short Creek, Arizona

Greetings y'all. Since I can't use a foot pedal, I'm always on the lookout for better options for amperage control. I have the rotary thumb control on my 280DX that I think is Miller's own. I just saw the Steady-Grip hand control on the CK Worldwide site. Does anyone here have any experience with this particular control? What I'm using now is very hard to taper off cleanly at the end of a bead. I stub my tungsten way too much :evil:
Thanks.
-Eldon
We are not lawyers nor physicians, but welders do it in all positions!

Miller Dynasty 280DX
Lincoln 210 MP
Miller 625 X-Treme
Hobart Handler 150
Victor Oxygen-acetylene torch
Miller/Lincoln Big 40-SA200 hybrid
Top
noddybrian
  • Posts:
  • Joined:
    Thu Jan 24, 2013 12:13 pm

If that's the clip on pistol grip that I think was new at Fabtech this year Wyatt did a quick review of it - probably not many out there yet to get feedback on.
Top
User avatar
  • Posts:
  • Joined:
    Thu Dec 26, 2013 12:41 am
  • Location:
    Laredo, Tx

Looks pretty cool.
Image
Top
User avatar
  • Posts:
  • Joined:
    Sat Jul 06, 2013 11:16 am
  • Location:
    Near Pittsburgh,Pennsylvania. Steel Buckle of the Rust Belt

I just ordered CK's wheel that is spring loaded and returns to zero automatically, I'll let you know how it works when it gets here.

Len
P. S. It's not the pistol grip, it's just a flat wheel type.


Sent from my iPhone using Tapatalk
Now go melt something.
Instagram @lenny_gforce

Len
Top
User avatar
  • Posts:
  • Joined:
    Wed Oct 23, 2013 3:30 pm
  • Location:
    Palmer AK

xwrench wrote:Greetings y'all. Since I can't use a foot pedal, I'm always on the lookout for better options for amperage control. I have the rotary thumb control on my 280DX that I think is Miller's own. I just saw the Steady-Grip hand control on the CK Worldwide site. Does anyone here have any experience with this particular control? What I'm using now is very hard to taper off cleanly at the end of a bead. I stub my tungsten way too much :evil:
Thanks.
-Eldon

As much as I hate to do it, here's a Mr. Tig video on it. ;)

https://www.youtube.com/watch?v=XyjWOpkeaH4
Just a couple welders and a couple of big hammers and torches.

Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
Top
User avatar
  • Posts:
  • Joined:
    Tue Aug 19, 2014 2:34 am
  • Location:
    Short Creek, Arizona

A spring loaded wheel that returns to zero by itself may be all I need. It's when I try to taper off that my hand movements usually stub the electrode.


Sent from my iPhone using Tapatalk
We are not lawyers nor physicians, but welders do it in all positions!

Miller Dynasty 280DX
Lincoln 210 MP
Miller 625 X-Treme
Hobart Handler 150
Victor Oxygen-acetylene torch
Miller/Lincoln Big 40-SA200 hybrid
Top
User avatar
  • Posts:
  • Joined:
    Sat Jul 06, 2013 11:16 am
  • Location:
    Near Pittsburgh,Pennsylvania. Steel Buckle of the Rust Belt

Eldon,
Here a link to CK's catalog; http://www.ckworldwide.com/Catalog.pdf and I ordered mine at Weldfabulous.com as they seem to be the only one who list it. They didn't have mine in stock but they said it should ship in 3-5 days.

Len
P. S. it was around $170 with a 28' cable.
Now go melt something.
Instagram @lenny_gforce

Len
Top
User avatar
  • Posts:
  • Joined:
    Tue Aug 19, 2014 2:34 am
  • Location:
    Short Creek, Arizona

Cool. I'll be waiting to hear how you like it.
-Eldon
We are not lawyers nor physicians, but welders do it in all positions!

Miller Dynasty 280DX
Lincoln 210 MP
Miller 625 X-Treme
Hobart Handler 150
Victor Oxygen-acetylene torch
Miller/Lincoln Big 40-SA200 hybrid
Top
soutthpaw
  • Posts:
  • Joined:
    Thu Sep 18, 2014 12:14 pm
  • Location:
    Sparks, NV

I used to have a finger control that slid forwards and backwards. Worked much better than say the TA186 style wheel. Looked like this one from USAWELD. http://www.usaweld.com/Hand-Amperage-Co ... rol201.htm
Top
User avatar
  • Posts:
  • Joined:
    Thu Jan 24, 2013 10:13 pm
  • Location:
    Eddy, TX

FYI, I called to get the ball rolling on getting my Steady Grip and they will not ship intil the first or second week of January 2015.
-Jonathan
Top
User avatar
  • Posts:
  • Joined:
    Tue Aug 19, 2014 2:34 am
  • Location:
    Short Creek, Arizona

I tore the foot pedal apart on my Eastwood machine and made this control from some of the pieces.
15199_10153057382654951_4738059515709202734_n.jpg
15199_10153057382654951_4738059515709202734_n.jpg (68.65 KiB) Viewed 706 times
10569044_10153057382864951_3240755523475685556_n.jpg
10569044_10153057382864951_3240755523475685556_n.jpg (78.96 KiB) Viewed 706 times
We are not lawyers nor physicians, but welders do it in all positions!

Miller Dynasty 280DX
Lincoln 210 MP
Miller 625 X-Treme
Hobart Handler 150
Victor Oxygen-acetylene torch
Miller/Lincoln Big 40-SA200 hybrid
Top
User avatar
  • Posts:
  • Joined:
    Thu Dec 26, 2013 12:41 am
  • Location:
    Laredo, Tx

soutthpaw wrote:I used to have a finger control that slid forwards and backwards. Worked much better than say the TA186 style wheel. Looked like this one from USAWELD. http://www.usaweld.com/Hand-Amperage-Co ... rol201.htm
Ohh I have that one for my HTP 221. Haven't even used it yet, lol. :lol:
Image
Top
Buttmason
  • Posts:
  • Joined:
    Tue Dec 23, 2014 3:12 pm

What about using a copper spoon at the end of your weld so you can time to scroll down a have shielding
Top
Post Reply

Return to “Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding”