Page 1 of 1
2% lanthinated on a transformer machine ?
Posted: Sat Jan 03, 2015 11:40 pm
by LIGOOMBA
Can 2% lanthinated be used on transformer machines ? I have a Miller SD180 .I have some red tungsten,thoriated so that's what I've been using and the green for aluminum .I also have some gold which should be 1.5 lanthinated I seen the video Jody did and was wondering if anyone was using the 2% on their transformer machines.The gold seems to work a little better than the red or maybe it's just me .Thanks
Re: 2% lanthinated on a transformer machine ?
Posted: Sat Jan 03, 2015 11:49 pm
by Braehill
I use 2% on a transformer all the time without problems.
Len
Re: 2% lanthinated on a transformer machine ?
Posted: Sun Jan 04, 2015 8:01 pm
by LIGOOMBA
I actually had some in my little plastic tig supply box .It seemed to hold up very good with aluminum while I was doing some aluminum drills .It worked well with steel as well. Gonna be ordering some !
Thanks Jody !
Re: 2% lanthinated on a transformer machine ?
Posted: Mon Jan 05, 2015 5:56 pm
by Wen
I use 2% Lantanated with my Lincoln Precision TIG 185. Works on steel and aluminum.