[adrynalinjunkie]

Does anyone have any plans or pictures of carts I could build for my new Invertig 221 ?

I am also open to buying a affordable cart, I have a Turbo hotside for my 67' Chevelle that I should really be investing my freetime in welding!

[motox]

welcome to the forum
if you look at the videos you will find a
cart that jodie just completed.
i have the same welder and I'm in the process
of making a cart borrowing some of jodie's
ideas as well as my own. first chance ill post some
photos of my progress.
craig

[motox]

here is a few photos for starters.

[motox]

rivet nuts to attach aluminum

[AndersK]

Welcome
A cart is always a good project to start learning a new welder. Do your homework and plan what you want to have on your cart, then you can start thinking of the design. The more time you spend planning the less time you will spend rebuilding it later, guess how I know that

Welder, gas tank, cable hangers, consumables, helmet, rod storage, clamps, tig finger, notebook and charts. You can make the list as long as you likfe, you set the standard for what good looks like when making something for your self.

Heres some pictures of my cart http://forum.weldingtipsandtricks.com/v ... f=9&t=5677
There are a lot of pictures of others in the forum as well

[taz]

Here are a few pics of my cart. It fits my welder, plasma cutter, gas bottle, rod oven, rods, electrodes, grinders etc, all with a very small footprint.

[Superiorwelding]

Taz,
That Kemppi is absolute junk. Better send it to me.
-Jonathan
P.S. don't forget to sent the remote too.

[taz]

Sure, do you also want the foot pedal or should I just throw it away

[SmartDave]

I have that exact setup. You will enjoy it


Sent from my iPad using Tapatalk HD

[Superiorwelding]

Sure, do you also want the foot pedal or should I just throw it away

Better send it too, wouldn't want to clutter up the dump.
-Jonathan

[Superiorwelding]

motox,
I really like that design with the TIG rod on the side. Might need to adopt that one.
-Jonathan

[taz]

Sure, do you also want the foot pedal or should I just throw it away

Better send it too, wouldn't want to clutter up the dump.
-Jonathan

Sure thing, since you won't be needing that Fronius junk then I would be happy to dispose it for you.

[Superiorwelding]

Sure, do you also want the foot pedal or should I just throw it away

Better send it too, wouldn't want to clutter up the dump.
-Jonathan

Sure thing, since you won't be needing that Fronius junk then I would be happy to dispose it for you.

-Jonathan

[xwrench]

Here's another cart if you're looking for ideas. I borrowed heavily from Jody's design and also used a lot of my own ideas, largely dictated by the materials I had available.

2014-12-12 10.38.32.jpg (91.33 KiB) Viewed 502 times

2014-11-29 12.35.28.jpg (50.58 KiB) Viewed 501 times

2014-12-01 13.11.50.jpg (85.6 KiB) Viewed 501 times

Hope this helps.
Cheers.
-Eldon

[Superiorwelding]

I have a pile of 1"x1"x1/8" alum square tube laying on the floor, maybe it would be a good foundation for a cart project. I have not built a welding cart in a long while.

Thanks for the pic Eldon, I have always liked the dual cylinder carts. I should post up pics of the carts we made at the shop for our DC600's. I am sure there is a idea or two that might help others.
-Jonathan

[motox]

jonathan
great way to start a project is to
have a pile of stuff to start.
except for the wheels, my cart was
all stuff i had.
craig