Tungsten Holder

Superiorwelding · Sun Mar 01, 2015 10:59 pm

Looking around Instagram and the Internet I have found some sweet tungsten holders. It is like many projects in the welding field where they are customised in many ways and unique to the builder. Here are two that I have build, mainly for fun. The first is just 1" copper pipe and caps that I bushed in the end. The other is a copy of some I saw on the internet. I used 1/8" 308 SS filler cut in 7" lengths and a 1986 (birth year) quarter on the bottom. To make the "tube" out of the filler I rubber banded them around a pipe and fused the ends. I intend to brush finish this one as well. The next one I want is a billet alum one made by a good friends machine shop.

Anyone else have tungsten holders to post up so we can steal your ideas? I mean, be inspired by?

-Jonathan

TRACKRANGER · Mon Mar 02, 2015 3:05 am

Jonathan, nice, and quite innovative.

I like the idea.

Will you decide to sort tungsten types into different containers?

Superiorwelding · Mon Mar 02, 2015 8:29 am

Trackranger,
I might make a few more of the copper ones to separate different tungsten types. I am also considering a container for the short pieces but don't know what I will use yet.
-Jonathan

Rick_H · Mon Mar 02, 2015 11:46 am

I like them....I usually leave them in the plastic cases, but I would like a way to store all the short pieces since most times I'm using a short back cap.

AndersK · Mon Mar 02, 2015 4:24 pm

Superiorwelding wrote:The next one I want is a billet alum one made by a good friends machine shop.

Do I sense a Jedi light saber inspired design here ?

The stainless one looks great. Wouldnt some brass look really good on it too?

motox · Mon Mar 02, 2015 5:06 pm

Jonathan
what will you use for a top on the stainless one?
its really sharp looking...
craig

Braehill · Mon Mar 02, 2015 11:25 pm

Jonathan,
You just reminded me that I forgot to follow up on the Instagram challenge. I use the Comando pin vise and it has the holder built into the top. It holds pieces that are cut in thirds or less, I like it. Not custom made but it's a nice tool none the less. Other than that it seems GreinTime gets to hold all my extra tungsten at his house.

Len

Braehill · Mon Mar 02, 2015 11:35 pm

Here's what I use, it's made by Comando Products.

Sent from my iPhone using Tapatalk

motox · Tue Mar 03, 2015 4:56 pm

len
now thats overkill
love it!
craig

Thu Mar 05, 2015 8:10 pm

I thought I'd add mine. This was an early TIG project for me, and I still use it. Built from 1/2" .049 SS tube and swagelock fittings, and the pocket clip is a bit of 1/8" TIG rod with the end balled.

: GEDC1615.JPG (167.91 KiB) Viewed 2678 times

Steve S

cameronccc · Thu Mar 05, 2015 8:46 pm

I need to build a new one. anyone else have and pictures?!

Superiorwelding · Thu Mar 12, 2015 1:12 pm

motox wrote:Jonathan
what will you use for a top on the stainless one?
its really sharp looking...
craig

Craig,
Sorry it took so long to respond. The cap is a 1/4" or 3/8" NPT plug, can't remember which. It is what I had laying around.
-Jonathan