Page 1 of 1

more pics of my progress @ 6 months welding

Posted: Tue Aug 31, 2010 2:14 am
by gurew
Image

Image

Image

:) gettin better 304 stainless sch40 to mild steel flange using 309 rod

Re: more pics of my progress @ 6 months welding

Posted: Tue Aug 31, 2010 9:30 pm
by Artisan
looks good :P keep it up

Re: more pics of my progress @ 6 months welding

Posted: Wed Sep 01, 2010 5:39 pm
by karlevo8
looks good ,just keep the practice up takes ages to get good and only a short time to "suck"

Re: more pics of my progress @ 6 months welding

Posted: Thu Sep 02, 2010 2:05 am
by gurew
didnt take me ages to get good :)

bought my welder with 6 hours, it currently has 149 hours in 6 months

Re: more pics of my progress @ 6 months welding

Posted: Thu Sep 02, 2010 2:59 am
by torn7th
Looks great my friend ... I love TIG stainless.....Keep it up... Your doing great :)

Re: more pics of my progress @ 6 months welding

Posted: Fri Sep 03, 2010 3:53 am
by tigmanjake
Looks good, but you can always get better and try to keep a humble attitude.

Re: more pics of my progress @ 6 months welding

Posted: Fri Sep 03, 2010 7:29 pm
by gurew
humble is for those that know they will never be top level...

Re: more pics of my progress @ 6 months welding

Posted: Wed Sep 08, 2010 11:28 am
by TT350
Was you using the “laying rod” technique or the paws and go?
looks good buy the way.

Re: more pics of my progress @ 6 months welding

Posted: Thu Sep 09, 2010 7:38 am
by gurew
was a mix of the both...pulse with foot on the flange and full pedal on the collector itself

Re: more pics of my progress @ 6 months welding

Posted: Thu Sep 09, 2010 12:27 pm
by tigger
you da man.. i have been using the pedal pulsing technique on stuff and i find it great at keeping heat down on thin sheet metal, and it gives me a more consistant weld bead. is this why you use the technique or is there something im missing?

Re: more pics of my progress @ 6 months welding

Posted: Fri Sep 10, 2010 4:18 am
by gurew
try setting your welder to 12pps pulse if you have that ability, then use the foot to pulse your bead :) works great at keeping the heat down overall but focused where it needs to be, i use that on the flanges alot

Re: more pics of my progress @ 6 months welding

Posted: Sat Sep 11, 2010 9:18 pm
by Trackmaster welder
Gooroo, been reading your posts and I'm guessing you must be a very young man. You seem a little too interested in telling everyone what a great welder you are. And if someone posts a pic of their project or progress you immediately post a pic of your "better looking" weld. That is a sign of imaturity, and it has nothing to do with being a " top level " weldor, ..... whatever you consider that to be. As for your comment about being humble, how does humility have anything to do with welding? ..... so only braggadocious overconfident weldors will ever be top level? Seriously?!

Listen, your welds look great and surely you have taken well to the skilled art of TIG welding, but it is too bad that you haven't taken the advice offered about being a bit more humble. Yes you have welded everday etc. etc, but six months is six months. It is not how good your beads look that make you a "top level" weldor, ...... It is EXPERIENCE. You can read about it, study it, go on forums etc, but you still have to have actually done it with your own hands. And it does take ages, YEARS, however you want to express it, to get that level of experience. Simply because there are SO many types of welds, materials, process spec's, so many situations and problem solving projects, that you just don't come across in a few months, or even years. In over 30 years of welding i have seen "hot shots" come and go. When you sit down in front of a $100,000.00 Aerospace part, you best have the Experience to be there. And ya know what, ..... you wont sit in front of that part until you have had enough YEARS under your belt, ... no matter how good you think you are. I'll bet simply because of your obvious passion for welding, you'll be better than the average bear at 5 years out. But remember there is a guy out there just as good as you thats seen 10 or 15 years of things go thru his hands.

I'm sorry, I don't mean to try and tear ya down man, but I just can't bite my tungue sometimes, and I think a little reflection will do ya well in your career as a weldor. Confidence is a good thing, but there is a point. You've got the hand skills, let them speak for them selves :)

And yes, I have sat in front of those parts, and a lot more, .... just FYI.

Re: more pics of my progress @ 6 months welding

Posted: Sat Sep 11, 2010 10:38 pm
by gurew
erm...well i share all ive learned on here posting my advice, i am good..obviously :) no over confidence here...my work literally does speak for itself....i wish someone would have posted the pics i have been posting so i could replicate their work and strive to be as good or better....alot of welding stuff is a big secret, esp making exhaust manifolds...cup size, tungsten type/size, gas flow, filler size, amps, pulse, etc....im sharing it all....and for my doing this for around 6 months if this is how well im doing...imagine the skill i will have with more experience...


so far im going through about a bottle a day of argon, i produce some fantastic products, and ill keep doing what im doing :) esp by posting pics of my work and helping others to produce solid, eye pleasing, strong, welds....

Re: more pics of my progress @ 6 months welding

Posted: Fri Sep 17, 2010 1:32 pm
by ogorir
"humble is for those that know they will never be top level..."

so... do you think Jody isn't a top level welder? I happen to think he's a pretty humble guy. in fact, most people who are 'top level' are pretty humble people who just really like what they do and like being good at it.

now, if you mean top-level income... you're probably right. you don't need to walk any walk as long as you can talk the talk to make money.

Re: more pics of my progress @ 6 months welding

Posted: Fri Sep 17, 2010 5:54 pm
by sschefer
We seen some of your work and it appears to be top quality by todays standards. Being humble simply means that you never consider yourself the best because you know there is always room for improvement and today's standards are just that. Obviously, in the back of your mind you are humble or you would be putting out crap, calling it the best and expecting others to believe it. Obviously you're not, so welcome to our humble group, like it or not. :mrgreen:

Re: more pics of my progress @ 6 months welding

Posted: Fri Sep 17, 2010 6:27 pm
by gurew
hehe im humble enough to meet my own standards :) screw everyone else's...mainly because i run the show at my own shop lol...no bosses for me!