Welding Tips and Tricks

Can anyone recommend a book or even a phone app that can be referenced for starting points for TIG welding like.

material type use this tungsten.
thickness starting amps,
Argon flow settings,
filler metal.etc.

Here you go:

https://www.millerwelds.com/resources/w ... calculator

Here are some additional reference guides below.

Also, in addition to the forum, have you checked out Jody's website Welding Tips and Tricks? There is also another site worth browsing, it is Go Welding

CK Worldwide - Technical Specifications for Tig Welding

Diamond Ground Products - Tungsten Guidebook - Guidebook for the Proper Selection and Preparation of Tungsten Electrodes for Arc Welding

ESAB - ESAB University - Arc Welding Technology Course

dynasty200sd wrote:Here are some additional reference guides below.

Also, in addition to the forum, have you checked out Jody's website Welding Tips and Tricks? There is also another site worth browsing, it is Go Welding

CK Worldwide - Technical Specifications for Tig Welding

Diamond Ground Products - Tungsten Guidebook - Guidebook for the Proper Selection and Preparation of Tungsten Electrodes for Arc Welding

ESAB - ESAB University - Arc Welding Technology Course

Big D & Dynasty, Thanks for the links! I have watched a ton of Jody's videos and have learned a ton from him! I was looking for a reference that I could go to quick while out in the shop. I am also keeping my own notes as far as settings and how they worked out...good or bad.

It's going to be a long ride learning, but I am looking forward to it.

These are all good.
Miller used to have a great 12 chapter free TIG welding book online that they removed a while back and per a Miller employee on their forum they replaced it with a $50 and now reduced to $29 paid book. Fortunately I saved all 12 sections of it and just combined it into a single PDF file for your viewing pleasure and can be downloaded from my Drive .<br />
<br />
Miller comprehensive TIG Handbook https://drive.google.com/open?id=0BzZ5FsoBYwCtTDZDNmlISVZKMEk since updated and replaced with https://www.millerwelds.com/equipment/training-solutions/training-materials/r0065236-no-name<br />
<br />
Miller SMAW/Stick Guidebook https://drive.google.com/open?id=0BzZ5FsoBYwCtbUEtMV9SNV8tQTg<br />
<br />
Miller MIG Guidebook https://drive.google.com/open?id=0BzZ5FsoBYwCtbXBMSDdab1ZlMnM<br />
<br />
Another good Resource in ESAB's online text <br />
TIG Handbook: http://www.esabna.com/euweb/tig_handbook/591tig1_1.htm<br />
<br />
MIG Handbook http://www.esabna.com/euweb/mig_handbook/592mig1_1.htm<br />
<br />
SMAW/Stick Handbook http://www.esabna.com/euweb/awtc/lesson1_1.htm<br />
<br />
OxyAcetylene Handbook [url="http://www.esabna.com/euweb/oxy_handbook/589oxy1_1.htm]http://www.esabna.com/euweb/oxy_handbook/589oxy1_1.htm[/url]

Sent from mobile. Not responsible for Typos

Thanks
Nice back to basics refresher for me.