Tig welding tips, questions, equipment, applications, instructions, techniques, tig welding machines, troubleshooting tig welding process
Aluminium waterpump housing repair Mercedes diesel
Post Reply
jockewahlstrom
  • Posts:
  • Joined:
    Sun Jan 03, 2016 5:48 pm
  • Location:
    Hakkas, Sweden.

Hi!
So this is my first ever repair/build up job and i'm also pretty new at tig welding..
The piece is probably not even cold as i write this im so exited about posting something :p

I should have taken my time to clean it better but i'm kind of happy with the end result..

I'll try to get the pictures in order next time :p
Attachments
i had the old pump to try on as i was sanding the housing down..<br />the owner himself will drill and thread the bolt holes:)
i had the old pump to try on as i was sanding the housing down..
the owner himself will drill and thread the bolt holes:)
image.jpeg (40.92 KiB) Viewed 1083 times
image.jpeg
image.jpeg (48.25 KiB) Viewed 1083 times
image.jpeg
image.jpeg (38.56 KiB) Viewed 1083 times
image.jpeg
image.jpeg (50.74 KiB) Viewed 1083 times
*TIG Welder : Stahlwerk 200P S AC/DC, 200Amp (german brand)
*MIG Welder : Big A*S old Kemppi, i don't know the model.
*Plasma cutter: Pela Cut 70P, 70A machine (cuts 20mm)
*Stick welder: Kemppi Minarc 150A
*A bunch of grinders and handtools.
Top
motox
  • Posts:
  • Joined:
    Thu Nov 28, 2013 12:49 pm
  • Location:
    Delaware

any time it works is time
to be happy
craig
htp invertig 221
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
Top
User avatar
  • Posts:
  • Joined:
    Thu May 07, 2015 11:46 am
  • Location:
    KY.

Nice repair. I bet that saved some money.
Freddie
Top
ex framie
  • Posts:
  • Joined:
    Sun Aug 09, 2015 1:09 am
  • Location:
    Brisbane QLD Land of oz

Looks like mercedes used to use some decent alloy in their pump housings, for the amount of cleaning you didnt do and the age of the pump theres not a lot of crap come out in the welds.
Good outcome.
Pete

God gave man 2 heads and only enough blood to run 1 at a time. Who said God didn't have a sense of humour.....
Top
jockewahlstrom
  • Posts:
  • Joined:
    Sun Jan 03, 2016 5:48 pm
  • Location:
    Hakkas, Sweden.

Thank you guys!
you are right about the housing beeing old it's a -78 mercedes:)
and if i remeber correctly the owner said it's a ~380USD part..
*TIG Welder : Stahlwerk 200P S AC/DC, 200Amp (german brand)
*MIG Welder : Big A*S old Kemppi, i don't know the model.
*Plasma cutter: Pela Cut 70P, 70A machine (cuts 20mm)
*Stick welder: Kemppi Minarc 150A
*A bunch of grinders and handtools.
Top
User avatar
  • Posts:
  • Joined:
    Sun Oct 27, 2013 10:57 pm
  • Location:
    Big Lake/Monticello MN, U.S.A.

Came out good - nice repair :)
Dave J.

Beware of false knowledge; it is more dangerous than ignorance. ~George Bernard Shaw~

Syncro 350
Invertec v250-s
Thermal Arc 161 and 300
MM210
Dialarc
Tried being normal once, didn't take....I think it was a Tuesday.
Top
User avatar
  • Posts:
  • Joined:
    Thu Aug 13, 2015 11:38 pm
  • Location:
    Scranton/WilkesBarre, Pennsylvania

Looks good man ! Some cast welds nicely and some not. Don't be surprised when you go to weld some other cast and it
just wants to become a bloddy mess . Congrats on the nice repair !
Top
User avatar
  • Posts:
  • Joined:
    Sat Aug 01, 2015 8:38 am
  • Location:
    The Land Down Under

Well done Jock, that looks like a solid repair.


Kym
Top
jockewahlstrom
  • Posts:
  • Joined:
    Sun Jan 03, 2016 5:48 pm
  • Location:
    Hakkas, Sweden.

Thank you! It is really nice to get all of this feedback..

I have a 19" aluminum rim with a crack in it coming up..
it's been welded once before with a aluminumstick and it also needs a lot of pre-weld work..
Let's see how that goes :)
*TIG Welder : Stahlwerk 200P S AC/DC, 200Amp (german brand)
*MIG Welder : Big A*S old Kemppi, i don't know the model.
*Plasma cutter: Pela Cut 70P, 70A machine (cuts 20mm)
*Stick welder: Kemppi Minarc 150A
*A bunch of grinders and handtools.
Top
noddybrian
  • Posts:
  • Joined:
    Thu Jan 24, 2013 12:13 pm

Nice job on the water pump - but please leave the wheel rim alone ! that's got bad news written all over it - unless it's used on a " res ride " at very low speeds & even then I'd not do it especially as someone has already botched it - legal implications for this outweigh any possible reason or price to attempt it.
Top
exnailpounder
  • Posts:
  • Joined:
    Thu Dec 25, 2014 9:25 am
  • Location:
    near Chicago

noddybrian wrote:Nice job on the water pump - but please leave the wheel rim alone ! that's got bad news written all over it - unless it's used on a " res ride " at very low speeds & even then I'd not do it especially as someone has already botched it - legal implications for this outweigh any possible reason or price to attempt it.
Good advice. Pick your battles wisely. Let someone else get sued.
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
Top
jockewahlstrom
  • Posts:
  • Joined:
    Sun Jan 03, 2016 5:48 pm
  • Location:
    Hakkas, Sweden.

Yes you are right ! I did not even think about that...

It's my own rim and i'm going to try it out to see how it goes:) it's a beat up old thing and i want to try and weld something that needs preheat..


But thank you for the advice!!
*TIG Welder : Stahlwerk 200P S AC/DC, 200Amp (german brand)
*MIG Welder : Big A*S old Kemppi, i don't know the model.
*Plasma cutter: Pela Cut 70P, 70A machine (cuts 20mm)
*Stick welder: Kemppi Minarc 150A
*A bunch of grinders and handtools.
Top
Boomer63
  • Posts:
  • Joined:
    Fri Sep 12, 2014 11:52 am
  • Location:
    Indiana near Chicago

ex framie wrote:Looks like mercedes used to use some decent alloy in their pump housings, for the amount of cleaning you didnt do and the age of the pump theres not a lot of crap come out in the welds.
Good outcome.


EXACTLY! Perfectly said! I would have expected to see the oil boiling out! Maybe the part is relatively new?
Gary
Top
jockewahlstrom
  • Posts:
  • Joined:
    Sun Jan 03, 2016 5:48 pm
  • Location:
    Hakkas, Sweden.

EXACTLY! Perfectly said! I would have expected to see the oil boiling out! Maybe the part is relatively new?
Gary[/quote]


It's a -78 original part:)


Owner called me after he put the part in.. He was really satisfied with fitment and there was no leakage:)
*TIG Welder : Stahlwerk 200P S AC/DC, 200Amp (german brand)
*MIG Welder : Big A*S old Kemppi, i don't know the model.
*Plasma cutter: Pela Cut 70P, 70A machine (cuts 20mm)
*Stick welder: Kemppi Minarc 150A
*A bunch of grinders and handtools.
Top
Post Reply

Return to “Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding”