Page 1 of 1
How many PPS on mild steel ?
Posted: Sat Feb 27, 2016 3:28 pm
by GaryL
Hi Folks-
I'd like to have your thoughts on PPS, Peak and Background settings when welding 1/8" mils steel lap joints. One limitation on my machine is the PPS range of 1-15 PPS. Thanks, Gary.
Re: How many PPS on mild steel ?
Posted: Sat Feb 27, 2016 4:41 pm
by Oscar
GaryL wrote:Hi Folks-
I'd like to have your thoughts on PPS, Peak and Background settings when welding 1/8" mils steel lap joints. One limitation on my machine is the PPS range of 1-15 PPS. Thanks, Gary.
Why are you intending to use pulse on mild steel lap joints is a better question......
Re: How many PPS on mild steel ?
Posted: Sat Feb 27, 2016 6:21 pm
by LtBadd
Oscar wrote:
Why are you intending to use pulse on mild steel lap joints is a better question......
I agree, however if you're just looking to experiment then do so, some use a very low number to time dipping the filler, then max it out at 15 and see how that is.
What machine do you have?
Re: How many PPS on mild steel ?
Posted: Sat Feb 27, 2016 11:28 pm
by zank
I would experiment between 0.7-1.5 pps. For me, anything between 3-20 pps gives me vertigo.
Re: How many PPS on mild steel ?
Posted: Mon Feb 29, 2016 11:42 am
by GaryL
Thanks for your reposes. I'm just starting to learn more about my Syncrowave 200 unit.