Hello all!
I need a small advice about making an extra cable with a starting switch for the TIG welding torch. What I want to do is fixing the welding torch and being able to start the process without touching the torch button. To do that, i need to build a new cable with a start switch (basically the same button on the torch) to connect the torch cable on the on side and the welding machine on the other side. In other words I want to bypass the welding torch button and build my own and press it from a distance. The welding machine is Castolin CastoTIG 1611DC and the cable connection is with 5 pins. I am attaching the torch connector's picture. Also url of the machine for the front panel. I hope someone could help me out, I am really not familiar with the electronics and cables..
Thanks!!
Alp
URL: https://www.castolin.com/product/castotig-1611-dc
uguralp.tpx
- uguralp.tpx
-
New Member
-
Posts:
-
Joined:Thu Mar 17, 2016 8:06 am
- Attachments
-
- torch_connector.JPG (39.39 KiB) Viewed 468 times
Without measuring the plug I couldn't tell you if these will fit but this style of connector is called an aviation plug.
http://www.amazon.com/uxcell-Thread-Avi ... +connector
Your pin outs for on/off are bridging 1 and 2 with a momentary on switch. You can test this by briefly putting a U shaped copper wire in those pin holes.
-Sandow
http://www.amazon.com/uxcell-Thread-Avi ... +connector
Your pin outs for on/off are bridging 1 and 2 with a momentary on switch. You can test this by briefly putting a U shaped copper wire in those pin holes.
-Sandow
Red-hot iron, white-hot iron, cold-black iron; an iron taste, an iron smell, and a babel of iron sounds.
-Charles Dickens
-Charles Dickens