Welding Tips and Tricks

Hi guys:

Just about to put together a cooler for my dynasty 210 dx. I noticed the 1/3 hp marathon motor that came with my procon pump/carbonator is rated to draw 7 amps. Is this too much for the cps 110v circuit on the dynasty? Any concerns here?

Thanks for any help,

Daniel

I think this must be a 10 amp circuit based on the reset button on the back of the welder. Just to be safe, I switched to a 1/4 hp motor with a lower amp draw. Daniel

Daniel, keep us posted on the cooler build, pics would be appreciated. Many make their own and your ideas may help someone else.