Which joint would be stronger? I know which would look nicer but is there a difference in the strength? I'm building a cart that will be 2'D X 4'W X 3.5'H. Bottom frame will be 1"x2" aluminum 6061 T6.
- Attachments
-
- image.jpeg (16.29 KiB) Viewed 754 times
Kriky
Hobbiest
Everlast PowerTig 210EXT
Hobbiest
Everlast PowerTig 210EXT
- DLewis0289
-
Ace
-
Posts:
-
Joined:Sun May 01, 2016 7:46 am
-
Location:Fort Myers Florida
If that is angle you are showing, coped or 45'd would be fine.......
AWS D1.1 / ASME IX / CWB / API / EWI / RWMA / BSEE
Scientists have substituted mathematics for experiments, and they wander off through equation after equation, and eventually build a structure which has no relation to reality." Nikola Tesla
Scientists have substituted mathematics for experiments, and they wander off through equation after equation, and eventually build a structure which has no relation to reality." Nikola Tesla
exnailpounder
- exnailpounder
-
Weldmonger
-
Posts:
-
Joined:Thu Dec 25, 2014 9:25 am
-
Location:near Chicago
What is the cart for and how strong does it need to be? If it doesn't need to critically strong then I would go for pretty.
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
Which is stronger? Well, kinda neither. You are better off doing a fully open corner joint. Pretty easy joint to weld nicely too.
-Sandow
-Sandow
Red-hot iron, white-hot iron, cold-black iron; an iron taste, an iron smell, and a babel of iron sounds.
-Charles Dickens
-Charles Dickens
Oh, I missed that those drawings were square tubing. The copped joint is stronger.
-Sandow
-Sandow
Red-hot iron, white-hot iron, cold-black iron; an iron taste, an iron smell, and a babel of iron sounds.
-Charles Dickens
-Charles Dickens
- big gear head
-
Ace
-
Posts:
-
Joined:Thu May 07, 2015 11:46 am
-
Location:KY.
The top joint with 45 degree angles is definitely stronger.
Freddie