[ImLow78]

Mig .035

Shannon

[TRACKRANGER]

Shannon

Pretty impressive items there.

Presumably you used a positioner rotator for the pipe work?

What is the actual diameter, and I wonder would you share your machine settings?

Thanks

Trevor

[ImLow78]

Shannon

Pretty impressive items there.

Presumably you used a positioner rotator for the pipe work?

What is the actual diameter, and I wonder would you share your machine settings?

Thanks

Trevor

Trevor, there was no positioner/rotator used on the pipe. The pipe IIRC was 6" or 8" dia with a wall thickness of 3/16" or 1/4". It's all done manually and welded with a millermatic 252. Wire .035, 19.9v, 310ipm wire speed and c25 gas.

Here is some shots of my root and cover passes on 14' dia casing 3/4" wall welded with 212 innershield welded in 2g.

Root


Cover


Over view Photos of that job.







Shannon

[ImLow78]

Trevor, here is a 120' string of cans (5 cans) 12' dia 1" wall that we welded in 5g on the ground and they used a 650 ton hydro and a 275 ton crawler to pick it off the ground and stand it vertical before putting it in the hole.

This job was welded with nr-233 wire.





Shannon

[ImLow78]

Tile plow arm repair. Had to replace the mounting ears on the boom. The ears was 2" thick and welded with 1/16" dual shield.









Shannon

[AKweldshop]

Impressive work Shannon!!!

[ImLow78]

Impressive work Shannon!!!

Thank you. I'm no where I would like to be but for only three years in I'm happy. It's been hard work but it's paying off. I've got bunches of photos of projects I've done or helped with if you guys would like to see them. Everything from cars to industraial stuff.

I'm currently working on some super structure used for pump jacks. This next set we build (this week) I'll shoot some photos of my vertical up and Chinese vertical with .045" (and possibly 1/16") dual shield. I rock .045" but I'm still working on that 1/16".

Shannon (jack of all trades but master of none)

[AKweldshop]

Impressive work Shannon!!!

Thank you. I'm no where I would like to be but for only three years in I'm happy. It's been hard work but it's paying off. I've got bunches of photos of projects I've done or helped with if you guys would like to see them. Everything from cars to industraial stuff.

I'm currently working on some super structure used for pump jacks. This next set we build (this week) I'll shoot some photos of my vertical up and Chinese vertical with .045" (and possibly 1/16") dual shield. I rock .045" but I'm still working on that 1/16".

Shannon (jack of all trades but master of none)

Please share some more pics of your work!!
I love looking at others work, I've shared pretty much all my work on these forums in the last year, and its lots of fun!!

[ImLow78]

Impressive work Shannon!!!

Thank you. I'm no where I would like to be but for only three years in I'm happy. It's been hard work but it's paying off. I've got bunches of photos of projects I've done or helped with if you guys would like to see them. Everything from cars to industraial stuff.

I'm currently working on some super structure used for pump jacks. This next set we build (this week) I'll shoot some photos of my vertical up and Chinese vertical with .045" (and possibly 1/16") dual shield. I rock .045" but I'm still working on that 1/16".

Shannon (jack of all trades but master of none)

Please share some more pics of your work!!
I love looking at others work, I've shared pretty much all my work on these forums in the last year, and its lots of fun!!

I just started a project thread. Here is the link guys. Keep watching it for I'll post what I can till my photobucket account runs out of bandwidth.

http://forum.weldingtipsandtricks.com/v ... f=9&t=5864
Shannon

[quvit92]

It is not mig it is flux core

[forrestderp]

Metal core full pen, weave.


Short arc, three different techniques same part lol.

[danielbuck]

tack tack tack tack tack

patching up some holes in the firewall of my old willys jeep

[AKweldshop]

Playing with my new machine!!

Haven't done much mig welding in about a year.

Warming up on some 3/8" by 2" flat bar.

Flat and vertical.

IMG_9877.JPG (54.72 KiB) Viewed 1601 times

IMG_9875.JPG (54.3 KiB) Viewed 1601 times

IMG_9912.JPG (47.83 KiB) Viewed 1601 times

[AKweldshop]

IMG_9913.JPG (56.54 KiB) Viewed 1601 times

IMG_9915.JPG (51.15 KiB) Viewed 1601 times

IMG_9920.JPG (43.16 KiB) Viewed 1601 times

[AKweldshop]

Tad to much spatter, still haven't found the sweet spot.

IMG_9921.JPG (45.49 KiB) Viewed 1601 times

IMG_9928.JPG (52.91 KiB) Viewed 1601 times

IMG_9930.JPG (41.46 KiB) Viewed 1601 times

[AKweldshop]

Now some vertical.

19.5v, 230ipm...

IMG_9933.JPG (70.74 KiB) Viewed 1696 times

IMG_9934.JPG (68.24 KiB) Viewed 1696 times

IMG_9935.JPG (67.67 KiB) Viewed 1696 times

[AKweldshop]

IMG_9937.JPG (76.71 KiB) Viewed 1696 times

IMG_9939.JPG (82.56 KiB) Viewed 1696 times

IMG_9959.JPG (79.33 KiB) Viewed 1696 times

[AKweldshop]

Mig is so fun

IMG_9960.JPG (66.73 KiB) Viewed 1696 times

IMG_9961.JPG (64.77 KiB) Viewed 1696 times

[AKweldshop]

Tried my hand at .045 duelshield...
3/8" to 1/2"....

IMG_0046.JPG (77.12 KiB) Viewed 1681 times

IMG_0053.JPG (84.96 KiB) Viewed 1681 times

IMG_0052.JPG (57.96 KiB) Viewed 1681 times

[WTFH]

Vertical up, not mine but one of my students, he is getting very close. This kid is steady as a rock. Not sure what his arc control/inductance was set at but a little more would have helped smooth it out a bit.
Lincoln Invertec V350
3/8" Mild Steel
0.035" L56
CO2
19 volts
John

[JDIGGS82]

image.jpg (58.02 KiB) Viewed 1545 times

image.jpg (58.02 KiB) Viewed 1545 times

Made this horseshoe heart for the woman and here's a bead i ran going for that stacked look

[motox]

and another horse goes barefoot.
nice looking beads!

[AKweldshop]

Nice dimes mate....

[soutthpaw]

AK, does that new ESAB still have the buttery smooth arc that the old migmaster 250's had? Used to have an old Ltec 250. Arc was so soft I thought there was something wrong with the machine the first few times I used it. That was coming from a lincoln 175+

[weldin mike 27]

When good welds go bad. Very bad.

Mick