[weldin mike 27]

Hi eveyone.

Ive been welding for around 10 years now. Everytime I clean the Mig shround out I always cut the wire off first. But it occured to me if I leave that ball on the end of the wire untill after i finish cleaning the shroud it is safer because you can't get cut or stabbed by the sharp point of the cut wire.

Sorry if this seems a bit DERRRR but hey, some times you can't see the forrest for the trees eh?

Hope this helps stop a painfull hand stabbing.

Mick

[Tater]

Reminds me of the moment I realized that my small home repairs came out a lot better when I finished the task before starting to drink beer.....

[weldin mike 27]

That's it, but its amazing how much your skills improve after a few though.

Mick

[MinnesotaDave]

That's it, but its amazing how much your skills improve after a few though.

Mick

Maybe, but like in shooting pool or darts, there is a point of diminishing return

[Braehill]

I think it's the 10/2 rule that's in play here when it comes to your skills (and women), at 10PM they're a 2 and at 2AM they're a 10.

Len

[Otto Nobedder]

I think it's the 10/2 rule that's in play here when it comes to your skills (and women), at 10PM they're a 2 and at 2AM they're a 10.

Len

I nominate this for "The Best Hijack Ever"!

[MinnesotaDave]

I think it's the 10/2 rule that's in play here when it comes to your skills (and women), at 10PM they're a 2 and at 2AM they're a 10.

Len

I've played the game with those rules before....at least I think I remember those nights

Not as bad of a morning as a buddy of mine had though - here's the short version:

They met while drunk. She is legitimately hotter than him.
Went to his place and passed out - no sex.
During the night he cuddled up, spooning her - passed out again and peed on her.
In the morning he still had to drive her home....

I asked how the ride was....he said..... "...Quiet....."

[Tater]

Ouch

[Otto Nobedder]

Okay, MinnesotaDave,

That's an even better hijack!

That's hilarious!

Steve S

[Braehill]

Yep, that beats mine hands down.

Len


Sent from my iPhone using Tapatalk

[forrestderp]

Oh man this thread reminds me of a time I had once that was less fan pleasant. I was working in a production environment pouring wire for 12-14 hours a day,(you see the other shift guy twice a day) and I was just beat and immediatly after finishing a weld I leaned on the fixture and accidentally stuck the red hot wire into my wrist and bumped a nerve, that hurt pretty bad. So on topic watch yourselves and stay safe!

[Tater]

Agreed, fatigue is the biggest danger of all.
I got a third degree burn from a hot tack falling on my leg. I have never heard of that from anyone else- obviously caused by my poor technique. I was using 6013 overhead to reinforce a 14-ft trailer with new cross members welded to the existing structure. I love the 6011 [this was corrected]- it's a very safe wire to use, fast freeze with light slag. That burn was so bad, it charred the full thickness black.
Whoever said he didn't want to see his wife burned, is a sincere and thoughtful man. After my pant leg stopped smoldering I worked the rest of the day and continued the following day. After the second day's work on the trailer I went home and changed the sway joints on my car. It was 95 degrees (hot for NH), my husband and I were under the car, and I said "Jack dear, what did So-and-So Auto quote to do this repair?" My leg hurt BAD. He said, "About 75 bucks." I have a good job- so does he. Don't recall what I said next but it was not ladylike.
By then cellulitis set in which quickly spread and scared the stuffing out of me... then a hospital visit, 2 weeks of antibiotics, and plastic surgery to remove the destroyed area and patch it. A week of missed work.
Very unusual for the molten filler to fall. I've never heard of it before.

[Superiorwelding]

Agreed, fatigue is the biggest danger of all.
I got a third degree burn from a hot tack falling on my leg. I have never heard of that from anyone else- obviously caused by my poor technique. I was using 6013 overhead to reinforce a 14-ft trailer with new cross members welded to the existing structure. I love the 6013- it's a very safe wire to use, fast freeze with light slag. That burn was so bad, it charred the full thickness black.
Whoever said he didn't want to see his wife burned, is a sincere and thoughtful man. After my pant leg stopped smoldering I worked the rest of the day and continued the following day. After the second day's work on the trailer I went home and changed the sway joints on my car. It was 95 degrees (hot for NH), my husband and I were under the car, and I said "Jack dear, what did So-and-So Auto quote to do this repair?" My leg hurt BAD. He said, "About 75 bucks." I have a good job- so does he. Don't recall what I said next but it was not ladylike.
By then cellulitis set in which quickly spread and scared the stuffing out of me... then a hospital visit, 2 weeks of antibiotics, and plastic surgery to remove the destroyed area and patch it. A week of missed work.
Very unusual for the molten filler to fall. I've never heard of it before.

Quick, lock this thread before someone sees the 6013 comment!!!!
-Jonathan

[Tater]

You made me think again, and double check the invoice for the trailer job. I used 6011, not 6013. I'm going to edit the previous to reflect that.

Well, WWW.... ("When Wives Weld")

[Tater]

This is the trailer. I tried to convince the owner his money was better spent replacing it. [img]

Annes95welding95project95031.jpg (84.25 KiB) Viewed 1454 times

[/img]

The difficulty was that the owner did not want to rebuild it or replace it. He wanted it reinforced. He wanted to use scrap materials wherever possible. And, it had to remain usable the entire time.[img]

0427141302a.jpg (74.72 KiB) Viewed 1454 times

[/img]

The brackets are forged flat bar, hot tacked onto the axles.[img]

0425141613.jpg (70.07 KiB) Viewed 1454 times

[/img]

It's not pretty, but it's safer than it was.

[GreinTime]

We can just pretend it's 6013 for arguments sake Jonathan

I was burning a slot in a bracket for a kid at work the other day, and he goes "DUDE YOUR SHOE IS ON FIRE!!!" So I look down under my Oakley's (Great burning glasses by the way, didn't mean to find that out but they were all I had on a road call one day) and see my shoe smoldering. Needless to say, that foot cover is made of stronger stuff than my Shox, because it just barely singed it, and it dropped like a rock through my shoes. #OneLeggedProblems

[79jasper]

^ Better than on your only foot. Lol
Always gotta have, a upside to look at.

Sent from my SM-G900R4 using Tapatalk

[TRACKRANGER]

That's it, but its amazing how much your skills improve after a few though.

Mick

After a bottle of red, I'm a #%@king expert. What more can I say?