Welding Tips and Tricks

I am looking for a flex neck for my mig gun. I was on a job and the guy working with me had a 2" flex neck on his gun with stubby contact tip and nozzle for really tight spaces. Where would a find one of those? And it did not look home made.

Any help apprriciate.

http://weldingdirect.com/bimbst230amp.html

Chilliepaste wrote:I am looking for a flex neck for my mig gun. I was on a job and the guy working with me had a 2" flex neck on his gun with stubby contact tip and nozzle for really tight spaces. Where would a find one of those? And it did not look home made. Any help apprriciate.

Chilliepaste wrote:I am looking for a flex neck for my mig gun. I was on a job and the guy working with me had a 2" flex neck on his gun with stubby contact tip and nozzle for really tight spaces. Where would a find one of those? And it did not look home made.

Any help apprriciate.

What model and brand of mig welder are you putting a gun on???
I believe HTP can make a gun for many different brands of machines....

check with HTP.
http://www.usaweld.com/Flexible-Neck-MIG-Gun-s/533.htm

Lanse did a video on this gun....
http://www.youtube.com/watch?v=ocS7Cn6sLnQ

Thank you for your responces but the shorts on those web sites was 10" long. I am using a bernard mig gun on a lincoln LN-25 suite case

Good luck, I'm not sure if the make a flex gun for a LN 25???
I'll do some looking for you.
John

http://www.bernardwelds.com/specialty-n ... uorlLQzLvE

have a look here. when in doubt, head straight to the source.

mick