Page 1 of 1
Outdoor Mig welding
Posted: Fri Dec 11, 2015 11:59 pm
by Blaze659
Quick question! Can you weld outside with regular mig wire and gas or is it to risky and only flux wire for outside?
Thank you for your time!
Re: Outdoor Mig welding
Posted: Sat Dec 12, 2015 12:07 am
by Poland308
You might be able to get away with it if you block the wind. Use card board. Plywood or even a sheet or tarp.
Re: Outdoor Mig welding
Posted: Sat Dec 12, 2015 4:44 am
by rahtreelimbs
Just keep the wind out......you will be fine.