duckhunter27
- duckhunter27
-
New Member
-
Posts:
-
Joined:Tue Jan 05, 2016 9:18 pm
Anyone know of a place hiring for a welder in the New Orleans area , Slidell , Covington . Tig ,stick,mig also aluminum and stainless . Anything will help thanks
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
While I don't see welding positions on their website at the moment, I'd put a resume' in at MECO,
http://www.meco.com/about-meco/employment
They pay well and seem to have a good work environment.
Also try Phoenix Energy Services, on 190 in Goodbee, a half-mile east of 1077.
I'll ask around on Monday, and might be able to give you a few that are known to be hiring.
Steve S
http://www.meco.com/about-meco/employment
They pay well and seem to have a good work environment.
Also try Phoenix Energy Services, on 190 in Goodbee, a half-mile east of 1077.
I'll ask around on Monday, and might be able to give you a few that are known to be hiring.
Steve S
duckhunter27
- duckhunter27
-
New Member
-
Posts:
-
Joined:Tue Jan 05, 2016 9:18 pm
Thanks a lot. I'll check into them
duckhunter27
- duckhunter27
-
New Member
-
Posts:
-
Joined:Tue Jan 05, 2016 9:18 pm
Maybe it's just me , but I can't find anything on Phoenix energy services in goodbee. Anyone know of a good number or website ?
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
I drive by it often.duckhunter27 wrote:Maybe it's just me , but I can't find anything on Phoenix energy services in goodbee. Anyone know of a good number or website ?
My search for a website or # came up blank, also.
I'll take a closer look tomorrow.
Steve S
- RocketSurgeon
-
Guide
-
Posts:
-
Joined:Wed Mar 11, 2015 9:13 am
-
Location:All around Lake Pontchartrain
Sorry if this is short notice (I got this yesterday, myself):
CB&I Open House – Screening for Shop Pipe Welders
Position: Shop Pipe Welders
This is not a Field position. This position does not offer per diem.
Minimum Requirements: Must be able to Tig, Mig, & Stick on Pipe.
Wednesday, April 20th, 2016
08:00 a.m. to 02:00 p.m.
Location:
29684 South Frost Road
Livingston, LA 70754
No Appointment Necessary.
Bring Resume or a list of Employment History and Qualifications.
PPE Required: long sleeve shirt, long pants, and steel toe leather boots (above ankle).
Qualified candidates will be required to complete a brief hands-on skills test at a secondary location.
Directions:
From Florida Blvd (Hwy 190):
Travel 4.8 miles and turn right onto S. Frost Road (red light in Livingston)
Location is a ½ mile on the left.
Training facility in Plaza 63 to the right of Carter’s Supermarket.
The CB&I Training Facility is the 4th building from the front of the building.
From I-12:
Take Exit 22 onto Hwy 63 in Livingston.
Travel North on South Frost Road
Location is 1.3 miles on the right.
Training facility in Plaza 63 to the right of Carter’s Supermarket.
The CB&I Training Facility is the 4th building from the front of the building.
CB&I Open House – Screening for Shop Pipe Welders
Position: Shop Pipe Welders
This is not a Field position. This position does not offer per diem.
Minimum Requirements: Must be able to Tig, Mig, & Stick on Pipe.
Wednesday, April 20th, 2016
08:00 a.m. to 02:00 p.m.
Location:
29684 South Frost Road
Livingston, LA 70754
No Appointment Necessary.
Bring Resume or a list of Employment History and Qualifications.
PPE Required: long sleeve shirt, long pants, and steel toe leather boots (above ankle).
Qualified candidates will be required to complete a brief hands-on skills test at a secondary location.
Directions:
From Florida Blvd (Hwy 190):
Travel 4.8 miles and turn right onto S. Frost Road (red light in Livingston)
Location is a ½ mile on the left.
Training facility in Plaza 63 to the right of Carter’s Supermarket.
The CB&I Training Facility is the 4th building from the front of the building.
From I-12:
Take Exit 22 onto Hwy 63 in Livingston.
Travel North on South Frost Road
Location is 1.3 miles on the right.
Training facility in Plaza 63 to the right of Carter’s Supermarket.
The CB&I Training Facility is the 4th building from the front of the building.
Chris
NASA is not the enemy of the American taxpayer.
AWS D1.1, D17.1
NASA is not the enemy of the American taxpayer.
AWS D1.1, D17.1
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
There is now a job available in Slidell.
The company is Elite Cryogenics, and is where I work.
They have opted to hire through a staffing agency, "Treo", but if you have the right qualifications I might be able to get you a direct-hire interview.
The most basic requirements are TIG on SS pipe, and MIG on carbon/stainless structure, and mechanical aptitude.
Additional skills that will make a standout candidate include pipefitting, fabrication, instrument fitting, and electrical. Not all (or any) are required, but each is a plus.
Steve
The company is Elite Cryogenics, and is where I work.
They have opted to hire through a staffing agency, "Treo", but if you have the right qualifications I might be able to get you a direct-hire interview.
The most basic requirements are TIG on SS pipe, and MIG on carbon/stainless structure, and mechanical aptitude.
Additional skills that will make a standout candidate include pipefitting, fabrication, instrument fitting, and electrical. Not all (or any) are required, but each is a plus.
Steve
- RocketSurgeon
-
Guide
-
Posts:
-
Joined:Wed Mar 11, 2015 9:13 am
-
Location:All around Lake Pontchartrain
Where, when and who do I contact?Otto Nobedder wrote:There is now a job available in Slidell.
The company is Elite Cryogenics, and is where I work.
They have opted to hire through a staffing agency, "Treo", but if you have the right qualifications I might be able to get you a direct-hire interview.
The most basic requirements are TIG on SS pipe, and MIG on carbon/stainless structure, and mechanical aptitude.
Additional skills that will make a standout candidate include pipefitting, fabrication, instrument fitting, and electrical. Not all (or any) are required, but each is a plus.
Steve
Chris
NASA is not the enemy of the American taxpayer.
AWS D1.1, D17.1
NASA is not the enemy of the American taxpayer.
AWS D1.1, D17.1
duckhunter27
- duckhunter27
-
New Member
-
Posts:
-
Joined:Tue Jan 05, 2016 9:18 pm
Can I send you my resume , I will contact treo . I have plenty experiment on as pipe and mig on carbon and stainless . I've done some pipe fitting and plenty of general fabrication . Thanks for the heads upOtto Nobedder wrote:There is now a job available in Slidell.
The company is Elite Cryogenics, and is where I work.
They have opted to hire through a staffing agency, "Treo", but if you have the right qualifications I might be able to get you a direct-hire interview.
The most basic requirements are TIG on SS pipe, and MIG on carbon/stainless structure, and mechanical aptitude.
Additional skills that will make a standout candidate include pipefitting, fabrication, instrument fitting, and electrical. Not all (or any) are required, but each is a plus.
Steve
- Attachments
-
- image.jpeg (41.75 KiB) Viewed 7412 times
-
- image.jpeg (68.41 KiB) Viewed 7412 times
-
- image.jpeg (47.56 KiB) Viewed 7412 times
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
Those are some good pictures.
I e-mailed you the contact information.
Steve S
I e-mailed you the contact information.
Steve S