Page 1 of 1
HELP PLEASE
Posted: Tue Jan 17, 2012 3:39 pm
by KAMAL REFAI
HI I HAVE THE MACHINE OERLIKONE CITOTRANS 501
AND I DO NOT HAVE ITS USER ,S MANUAL
PLEASE HELP ME TO SET UP THE MACHINE FOR WORK
THANKS
Re: HELP PLEASE
Posted: Wed Jan 18, 2012 7:03 pm
by Greg From K/W
SPAM SPAM SPAM SPAM SPAM> Did I mention SPAM?
Re: HELP PLEASE
Posted: Wed Apr 11, 2012 11:26 pm
by kermdawg
step.1-Is the machine plugged in?
step.2-Is the machine turned on?
step.3-Is the operator knowledgeable enough to figure out how to do step.1 and step.2? If so, proceed to step.4
step.4-Strike arc.
Step.5-Curse self for not flipping down hood before striking arc.
Re: HELP PLEASE
Posted: Tue Oct 23, 2012 12:29 pm
by Budee
Hey" KAMAL REFAI " hope you are fine. 1st you need to plugin machine 2nd step turn on your machine as "kermdawg" told you & you must learn some knowledge about your machine. For this purpose you need to read out the instructions diary or searching with your machine name & model number. Then you could easily operate your machine.
Re: HELP PLEASE
Posted: Tue Oct 23, 2012 5:58 pm
by weldin mike 27
Ha ha,
Spammers answering spammers...... Spamception!!!! Sorry, any fans of memes or demotivationals will know what im on about. Sorry to the normal people.
Mick
