not to much welding here (cracked frame, front fork mod) but
i thought bike guys might like take a look.
1980 honda cr250 restoration Red Rocket
craig
What welding projects are you working on? Are you proud of something you built?
How about posting some pics so other welders can get some ideas?
How about posting some pics so other welders can get some ideas?
- Attachments
-
- honda cr250 left.JPG (110.22 KiB) Viewed 2117 times
-
- honda cr250 front.JPG (102.37 KiB) Viewed 2117 times
htp invertig 221
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
noddybrian
- noddybrian
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 24, 2013 12:13 pm
Very nice retro looking bike - some decals on the tank would finish it off & break up the sea of red - never realized they put the kick start on the " wrong " side on that model - I hate left hand kick starts ! never feels right & the couple of of Rotax 500 powered bikes with it I had were a bastard to start ! is that the same engine they put in the atc250r ? those things really went especially the last couple of years with the 6speed box - I nearly bought one in bits years ago but was'nt sure how many bits it may have been missing so I left it - wished I got it now - they make fortunes.
noddybrian wrote
"some decals on the tank would finish it off & break up the sea of red"
had the honda wings on he tank when i first did the bike to race.
gas fumes lifted them off in a few weeks.
not sure how long it will sit before sold so opted not to put them on
craig
"some decals on the tank would finish it off & break up the sea of red"
had the honda wings on he tank when i first did the bike to race.
gas fumes lifted them off in a few weeks.
not sure how long it will sit before sold so opted not to put them on
craig
htp invertig 221
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
noddybrian
- noddybrian
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 24, 2013 12:13 pm
Yes- they put some nasty s#it in the gas these days - takes most stuff off & buggers rubber parts - last tank I painted I did in 2k put the decals on the base coat then clear coated over the lot - stayed put well so far.
- LtBadd
-
Weldmonger
-
Posts:
-
Joined:Sun Apr 12, 2015 4:00 pm
-
Location:Clearwater FL
-
Contact:
Hey Craig, here is my brothers 1974 250 Elsinore. For anyone interested in the background of this bike that dominated it's class when introduced
- 250_Elsinore_1974.jpg (68.31 KiB) Viewed 2048 times
Richard
Website
Website
richard,
yes Honda changed the motocross world with the 125 and 250 Elsinores.
they were light and fast compared to the European bikes.
i raced Bultaos in 1974 and you needed a lot of motor work to
pull a start against a stock Elsinore.
craig
yes Honda changed the motocross world with the 125 and 250 Elsinores.
they were light and fast compared to the European bikes.
i raced Bultaos in 1974 and you needed a lot of motor work to
pull a start against a stock Elsinore.
craig
htp invertig 221
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
Looks great Motox! Love those old 2 strokes, I just sold a 1980 YZ 465 a few years ago to a collector. He has two huge barns with two levels full of bikes. He has bikes both street and dirt with the tits still on the original tires and about six brands I had never even heard of, place is like a museum. One of my favs that he had, was a new Kawasaki 500 triple 2 stroke. Every single bike has ethanol free req. fuel in it and they all are run..
Pete
Esab SVI 300, Mig 4HD wire feeder, 30A spool gun, Miller Passport, Dynasty 300 DX, Coolmate 4, Spectrum 2050, C&K Cold Wire feeder WF-3, Black Gold Tungsten Sharperner, Prime Weld 225
Esab SVI 300, Mig 4HD wire feeder, 30A spool gun, Miller Passport, Dynasty 300 DX, Coolmate 4, Spectrum 2050, C&K Cold Wire feeder WF-3, Black Gold Tungsten Sharperner, Prime Weld 225
mechanic416
- mechanic416
-
Active Member
-
Posts:
-
Joined:Fri Jan 12, 2018 7:16 pm
-
Location:Clayton, Delaware
Never had a dirt bike. Did a lot of welding on them though. Street bikes and drag bikes for me, but have sold them all, doctors orders.
Return to “Welding Projects - Welding project Ideas - Welding project plans”
Jump to
- Introductions & How to Use the Forum
- ↳ Welcome!
- ↳ Member Introductions
- ↳ How to Use the Forum
- ↳ Moderator Applications
- Welding Discussion
- ↳ Metal Cutting
- ↳ Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- ↳ Mig and Flux Core - gas metal arc welding & flux cored arc welding
- ↳ Stick Welding/Arc Welding - Shielded Metal Arc Welding
- ↳ Welding Forum General Shop Talk
- ↳ Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds
- ↳ Welding Projects - Welding project Ideas - Welding project plans
- ↳ Product Reviews
- ↳ Fuel Gas Heating
- Welding Tips & Tricks
- ↳ Video Discussion
- ↳ Wish List
- Announcements & Feedback
- ↳ Forum News
- ↳ Suggestions, Feedback and Support
- Welding Marketplace
- ↳ Welding Jobs - Industrial Welding Jobs - Pipe Welding Jobs - Tig Welding Jobs
- ↳ Classifieds - Buy, Sell, Trade Used Welding Equipment
- Welding Resources
- ↳ Tradeshows, Seminars and Events
- ↳ The Welding Library
- ↳ Education Opportunities