[deni822]

Well, first post on this forum, might as well introduce myself with some pictures.

I'm a beginner hobby welder and my mojo is to always practice on something that is useful. My first project was with a borrowed 120V flux core welder to build myself a work bench a year and a half ago. This led to me falling in love with welding and buying my own setup.

IMG_4473.JPG (52.6 KiB) Viewed 6113 times

IMG_4520.JPG (47.9 KiB) Viewed 6113 times

Once I got my new welder, I needed a rack for my steel stock, so made some small wall racks for it.

IMG_4849.JPG (109.09 KiB) Viewed 6113 times

IMG_4871.JPG (63.57 KiB) Viewed 6113 times

Then, I had to of course buy a band saw... and build a vertical portaband stand...

IMG_6334.JPG (58.53 KiB) Viewed 6113 times

IMG_6331.JPG (106.54 KiB) Viewed 6113 times

IMG_6364.JPG (98.63 KiB) Viewed 6113 times

And then I was set to weld anything I could get my hands on.

A shock bleeding reservoir stand...

IMG_6366.JPG (89.61 KiB) Viewed 6113 times

Night stand tables from reclaimed oak tops...

IMG_6066.JPG (211.81 KiB) Viewed 6113 times

IMG_6283.JPG (178.64 KiB) Viewed 6113 times

A console table from the same oak top and my old 26in MTB wheels.

IMG_6916.JPG (211.55 KiB) Viewed 6113 times

IMG_7017.JPG (132.66 KiB) Viewed 6113 times

My first aluminum project - a tuna fishing rod rack.

IMG_6861.JPG (115.56 KiB) Viewed 6113 times

IMG_6906.JPG (192.75 KiB) Viewed 6113 times

And finally a new welding cart, inspired by weldmonger himself.

IMG_7190.JPG (156.46 KiB) Viewed 6113 times

[Mike]

deni822, welcome to the forum.

[LtBadd]

Welcome to the forum
Nice fab work!

[deni822]

Thanks guys. Looking forward to learning from you all.

[OzFlo]

Nice work! Love the tables!

[richard parker]

good stuff!

[PhillerTime]

Cool stuff! Great job!

[Simclardy]

Nice work. How did you weld the aluminum?

Sent from my SCH-I535PP using Tapatalk

[deni822]

Nice work. How did you weld the aluminum?

Sent from my SCH-I535PP using Tapatalk

Thanks guys.

Tig'ed it with the SW200. And finally installed it on my father in-laws blue fin tuna boat this past week.

tuna rod holder.JPG (56.95 KiB) Viewed 5701 times

[cj737]

I am suspect of the strength of those rod holders. Typically, they're made form schedule 40 and fully welded down their sides. I couldn't see welds more than tacks at top and bottom. If they're only for use while running, then no big deal. But if your FIL trolls those reels from those holders, you could have a serious problem on your hand if they break and his $1,000 saltwater rig goes for a swim in the Atlantic...

Just saying-

[deni822]

I am suspect of the strength of those rod holders. Typically, they're made form schedule 40 and fully welded down their sides. I couldn't see welds more than tacks at top and bottom. If they're only for use while running, then no big deal. But if your FIL trolls those reels from those holders, you could have a serious problem on your hand if they break and his $1,000 saltwater rig goes for a swim in the Atlantic...

Just saying-

No trolling, just storage. No rack mounted to a fiberglass lip would hold an 800lb tuna...

[deni822]

Finished another beginner project this weekend. Pretty happy how it turned out and my MIG technique is getting much better. There is no replacement for burning wire to get better that's for sure. Now we can creep on neigbours in style...

IMG_1457.JPG (131.57 KiB) Viewed 4284 times

[homeboy]

Just curious if the table tops are made from oak van truck flooring? I have done work in a local plant that manufactures it and have heard of people finishing it but have never seen the end results. Whatever you used it all turned out very nice.

[deni822]

Just curious if the table tops are made from oak van truck flooring? I have done work in a local plant that manufactures it and have heard of people finishing it but have never seen the end results. Whatever you used it all turned out very nice.

No, I found some cheesy really old 70's or 80's coffee tables and just refinished and re-purposed them to these.

[Tbaugh]

Great looking bench. I think you've just given me an idea.

[deni822]

Thanks Tbaugh. Glad to give others ideas. I got this bench design and idea from someone else as well.

[pgk]

Looks great Deni, I like your work bench design. And that chair is very kool.

Pete

[deni822]

Looks great Deni, I like your work bench design. And that chair is very kool.

Pete

Thanks Pete. Haven't been on here in a while, so just saw your post.

Cheers.

[deni822]

Another beginner project finished. Posting to give some other beginners more project ideas.

Window well cover with escape hatch so the kiddos and doggos don't plunge into the pungie sticks.

IMG_3038.JPG (137.46 KiB) Viewed 3791 times

IMG_3044.JPG (144.54 KiB) Viewed 3791 times

IMG_3035.JPG (158 KiB) Viewed 3791 times

[LtBadd]

Looks real good deni882

[deni822]

Thanks Richard.

[deni822]

Finally finished a pirate chest that’s been a work in progress for a few months. Mild steel mig and tig welded with a black oxide finish and oak. Name tag was silicon bronze on mild steel.

IMG_2275.JPG (48.4 KiB) Viewed 3649 times

7583878160__32A2346.JPG (108.45 KiB) Viewed 3649 times

IMG_3292.JPG (93.37 KiB) Viewed 3649 times

IMG_3294.jpg (94.88 KiB) Viewed 3649 times

[deni822]

And, here is one from last winter. A kitchen helper. 1in tubing and walnut scraps.

6174593296__32A1401.JPG (107.43 KiB) Viewed 3649 times

IMG_1772.JPG (64.42 KiB) Viewed 3649 times

[cj737]

And, here is one from last winter. A kitchen helper. 1in tubing and walnut scraps.

Just make sure that "helper" can't reach the liquor cabinet standing atop your handsome work

[deni822]

Time to start marking the bottles...