Sent from my iPhone using Tapatalk
- tungstendipper
-
Weldmonger
-
Posts:
-
Joined:Sun Nov 19, 2017 10:09 am
Just finished refurbishing an old, rusty, 43" slip roller. Bought it at an Estate Sale (50 bucks) where it had been stored outside for over a year. Also, built a stand for it so it can be wheeled around the shop.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Lincoln MP 210, Lincoln Square Wave 200,
Everlast 210 EXT
Thermal Dynamics 25 Plasma cutter
" Anything that carries your livelihood wants to be welded so that Thor can’t break it."
CJ737
Everlast 210 EXT
Thermal Dynamics 25 Plasma cutter
" Anything that carries your livelihood wants to be welded so that Thor can’t break it."
CJ737
- tungstendipper
-
Weldmonger
-
Posts:
-
Joined:Sun Nov 19, 2017 10:09 am
Thanks all for the kind words!
First photo, 24hours in Evapo-rust (doing it this way it only took a 1/3 of a gallon) , then on to the lathe (2nd photo) where it got filed. emery clothed, then Scotch -brite, 3rd photo, the three rollers. first one, before, second just out of the Evapo-rust, the third finished.
First photo, 24hours in Evapo-rust (doing it this way it only took a 1/3 of a gallon) , then on to the lathe (2nd photo) where it got filed. emery clothed, then Scotch -brite, 3rd photo, the three rollers. first one, before, second just out of the Evapo-rust, the third finished.
- Attachments
-
- evapo.jpg (116.57 KiB) Viewed 2050 times
-
- roller lathe.jpg (105.87 KiB) Viewed 2050 times
-
- roller seq.jpg (75.74 KiB) Viewed 2050 times
-
- roller.jpg (56.4 KiB) Viewed 2050 times
Lincoln MP 210, Lincoln Square Wave 200,
Everlast 210 EXT
Thermal Dynamics 25 Plasma cutter
" Anything that carries your livelihood wants to be welded so that Thor can’t break it."
CJ737
Everlast 210 EXT
Thermal Dynamics 25 Plasma cutter
" Anything that carries your livelihood wants to be welded so that Thor can’t break it."
CJ737
- LtBadd
-
Weldmonger
-
Posts:
-
Joined:Sun Apr 12, 2015 4:00 pm
-
Location:Clearwater FL
-
Contact:
Looks great, I'll give you $100 
I recently bought the Evapo-Rust but haven't used it yet, also got their Rust Block, supposed to prevent rust for 1 year
I recently bought the Evapo-Rust but haven't used it yet, also got their Rust Block, supposed to prevent rust for 1 year
Richard
Website
Website
- tungstendipper
-
Weldmonger
-
Posts:
-
Joined:Sun Nov 19, 2017 10:09 am
Thanks!LtBadd wrote:Looks great, I'll give you $100
I recently bought the Evapo-Rust but haven't used it yet, also got their Rust Block, supposed to prevent rust for 1 year
Here in DRY Colorado, as long as it's inside we do not have to worry about rust.
Lincoln MP 210, Lincoln Square Wave 200,
Everlast 210 EXT
Thermal Dynamics 25 Plasma cutter
" Anything that carries your livelihood wants to be welded so that Thor can’t break it."
CJ737
Everlast 210 EXT
Thermal Dynamics 25 Plasma cutter
" Anything that carries your livelihood wants to be welded so that Thor can’t break it."
CJ737
BillE.Dee
- BillE.Dee
-
Weldmonger
-
Posts:
-
Joined:Mon Nov 27, 2017 8:53 pm
-
Location:Pennsylvania (Northeast corner)
That is wonderful workmanship in the re-hab of the tool. My wife "borrows" a lot of my tools and I can usually regroup them from around the pool area --- about 3 months after the heavy rains.
Thought I saw some kind of gizmo on facebook being advertised that will remove oxidation from metalic surfaces. It looked like a hair dryer and I didn't see any actual footage of it working - only still picture in the ad.
Thought I saw some kind of gizmo on facebook being advertised that will remove oxidation from metalic surfaces. It looked like a hair dryer and I didn't see any actual footage of it working - only still picture in the ad.
noddybrian
- noddybrian
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 24, 2013 12:13 pm
Is that the " laser " rust removing gun ? several video's of it working on Utube - looks great but don't ask the price !