- Radishfever
-
Guide
-
Posts:
-
Joined:Wed Aug 21, 2019 5:43 pm
-
Location:Cape Cod, MA
Recently
Last edited by Radishfever on Wed Oct 02, 2019 1:09 am, edited 1 time in total.
Learning is the best part of life and the most painful
Nice ventilation project. I have one in the works to ventilate my garage up into the attic, since the attic is ventilated with a fan as well. My plan is to use/build a sliding panel with the fan attached, where the attic entrance is, so I just pull down the door for the attic ladder, and there is the fan pushing air up into the attic. And if I need to access the attic, I just slide that panel out of the way.
- Radishfever
-
Guide
-
Posts:
-
Joined:Wed Aug 21, 2019 5:43 pm
-
Location:Cape Cod, MA
Thanks.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Last edited by Radishfever on Wed Oct 02, 2019 1:10 am, edited 1 time in total.
Learning is the best part of life and the most painful
- weldin mike 27
-
Weldmonger
-
Posts:
-
Joined:Fri Apr 01, 2011 10:59 pm
-
Location:Australia; Victoria
Very good work. Don't forget that at source extraction is the best option. Because if you have an overhead fan or sucker, it still has to pass your breath hole on the way. A flexible duct to bring the suction down to the arc area is the best idea. Keep up the good work
- Radishfever
-
Guide
-
Posts:
-
Joined:Wed Aug 21, 2019 5:43 pm
-
Location:Cape Cod, MA
Thank you
I
I
Last edited by Radishfever on Wed Oct 02, 2019 1:10 am, edited 1 time in total.
Learning is the best part of life and the most painful
- Radishfever
-
Guide
-
Posts:
-
Joined:Wed Aug 21, 2019 5:43 pm
-
Location:Cape Cod, MA
More t
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Learning is the best part of life and the most painful